Changes between Version 24 and Version 25 of Hardware/hNodes/cNodeVer3/dAssembly/cBios/aLV67C


Ignore:
Timestamp:
Dec 16, 2011, 10:21:26 PM (13 years ago)
Author:
seskar
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Hardware/hNodes/cNodeVer3/dAssembly/cBios/aLV67C

    v24 v25  
    77 1. [#CaseAssembly Install Motherboard / Power supply]
    88
    9 == Flash The LV67-C bios == #Lv67cBios
     9=== Flash The LV67-C bios === #Lv67cBios
    1010
    1111 1. After removing the lv-67c kit from it wrapping attach the pcm-cia and mini-pice cards (As [#CaseAssembly below]).
     
    7878
    7979----
    80 == How to flash and install the CM3 module == #Cm3Install
     80=== How to flash and install the CM3 module === #Cm3Install
    8181Flashing the CM can be done one of two ways
    82 === Flashing the CM over FTP ===
     82==== Flashing the CM over FTP ====
    8383  1. Plug the CM3 into the network and power it on
    8484  2. Find the IP address of the CM3 (whether it be already in DHCP or randomly assigned)
     
    105105 
    106106----
    107 == How to Assemble the Case == #CaseAssembly
    108 === Components you will need to assemble a case: ===
     107=== How to Assemble the Case === #CaseAssembly
     108==== Components you will need to assemble a case: ====
    109109[[Image(ComponentList.jpg, 300)]]
    110110==== System: ====
     
    138138 * 2 x minipice adapter screws (supplied with adapter)
    139139 * 3 x ufl-sma pig tails (9in)
    140 === Main U chassis: ===
     140==== Main U chassis: ====
    141141 1. Assemble mini-pcie if necissary:[[BR]][[Image(PciESide.jpg, 300)]][[Image(PciETop.jpg, 300)]]
    142142  1. There is a specific orientation for the 1/2 height adapter plate. If oriented incorrectly the card will not mount properly into the motherboard.