Changes between Version 27 and Version 28 of Hardware/fDevices/cSDR/gUSRP


Ignore:
Timestamp:
May 30, 2014, 6:17:59 PM (10 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/fDevices/cSDR/gUSRP

    v27 v28  
    77Majority  of SDR devices in ORBIT grid are various generations of [http://en.wikipedia.org/wiki/Universal_Software_Radio_Peripheral Universal Software Radio Peripherals (USRP)] . Each USRP, whether USB or Ethernet based, is attached to [wiki:Hardware/hNodes/cNodeVer3 genration 3 node] and is physically located on a small shelf immediately underneath the node (as shown in antenna figure beow). In case of USRP devices, the USB interface is attached to one of the USB2 ports on a corresponding node. For USRP2s (and N210s), the Ethernet interface of each device is connected to a (third) dedicated Ethernet interface on the node (eth2) that is used solely for USRP related communication. The nodes with USRP devices are distributed through the grid as shown in the [wiki:Hardware/fDevices/gUSRP#grid deployment table]. In addition to grid deployment two sandboxes are available for development: [wiki:Hardware/bDomains/cSandboxes/cSB3 sandbox3] is equipped with [wiki:Hardware/fDevices/gUSRP#sb3 two USRP2s], while [wiki:Hardware/bDomains/cSandboxes/eSB5 sanbox5] has [wiki:Hardware/fDevices/gUSRP#sb5 two USRPs] attached.   
    88
    9  || Device || [https://www.ettus.com/product/details/USRP-PKG USRP] || [https://www.ettus.com/product/details/USRP-PKG USRP2 / USRP N210] ||
    10  || Photo || [[Image(IMG_2236.JPG, width=300, height=300)]] || [[Image(USRP2 Photo.jpg, width=300)]] ||
    11  || Vendor || [http://www.ettus.com/ Ettus Research] || [http://www.ettus.com/ Ettus Research] ||
    12  || Interface type || USB |||| Gigabit Ethernet ||
    13  || Device ID || fffe:0002 |||| eth2 ||
    14  || Driver || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] |||| [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UDH] ||
     9 || Device || [https://www.ettus.com/product/details/USRP-PKG USRP] || [https://www.ettus.com/product/details/USRP-PKG USRP2 / USRP N210] || [https://www.ettus.com/product/details/X310-KIT USRP X310] ||
     10 || Photo || [[Image(IMG_2236.JPG, width=300, height=300)]] || [[Image(USRP2 Photo.jpg, width=300)]] || [[Image(08231316_650x650_1.jpg, width=300)]] ||
     11 || Vendor || [http://www.ettus.com/ Ettus Research] || [http://www.ettus.com/ Ettus Research] || [http://www.ettus.com/ Ettus Research] ||
     12 || Interface type || USB || Gigabit Ethernet || Dual 10 Gigabit Ethernet ||
     13 || Device ID || fffe:0002 || eth2 || ||
     14 || Driver || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] || [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UDH] ||
    1515
    1616==== Antenna Mounting ====
    1717
    18  ||  USRP  ||  USRP2 / USRP N210  ||
    19  || [[Image(USRP Antenna Placement.jpg,width=300)]] || [[Image(SBX Antenna Placement.jpg,width=300)]] ||
     18 ||  USRP  ||  USRP2 / USRP N210  || USRP X310 ||
     19 || [[Image(USRP Antenna Placement.jpg,width=300)]] || [[Image(SBX Antenna Placement.jpg,width=300)]] || [[Image(IMG_3941.JPG,width=300)]] ||
    2020
    2121
    … …  
    2424===== GRID ===== #grid
    2525||  Node Coordinate  ||  Device type  ||  RF Daughter Boards (side A) ||  RF Daughter Boards (side B)  ||
     26||  ![3,20]    ||  USRP X310  ||  [https://www.ettus.com/product/details/SBX120 SBX120]  ||  [https://www.ettus.com/product/details/CBX120 CBX120]  ||
     27||  ![8,1]    ||  USRP X310 ||  [https://www.ettus.com/product/details/SBX120 SBX120]  ||  [https://www.ettus.com/product/details/CBX120 CBX120]  ||
    2628||  ![5,16]    ||  USRP2  ||  [https://www.ettus.com/product/details/SBX SBX]  ||  -  ||
    2729||  ![8,8]   ||  USRP2  ||  [https://www.ettus.com/product/details/SBX SBX]  ||  -  ||