Changes between Version 7 and Version 8 of Hardware/bDomains/cSandboxes/dSB4


Ignore:
Timestamp:
Dec 21, 2011, 2:12:28 AM (13 years ago)
Author:
seskar
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Hardware/bDomains/cSandboxes/dSB4

    v7 v8  
    1 [[TOC(Hardware/gDomains/*)]]
     1[[TOC(Hardware/gDomains*)]]
    22
    3 = SB4 =
     3== SB4 ==
    44
    55As shown in Figure 1, sandbox 4 consists of 8 nodes and a WiMAX subsystem that consists of a basestation and a controller. To prevent interference, each node is housed in [http://www.ramseytest.com/ Ramsey Electronics RF enclosure] that provides 80 dB of isolation. Nodal wireless devices (Atheros 5000X mini-PCI card and Intel 6250 mini-PCIe 802.11/802.16) are connected to a power combiner and fed through the enclosure access port to the outside SMA connector which is wired to a single input/output of the ports of the [wiki:Documnetation/Topology/aRFControl RF Transceiver Test System] from [http://www.jfwindustries.com JFW Industries]. This configuration enables fairly tight control of RF attenuation between the nodes. The topology is controlled through the [http://omf.mytestbed.net OMF] based [wiki:Documentation/Services/bInstrumentationControlService Instrumentation AM].