Changes between Version 7 and Version 8 of Hardware/bDomains/cSandboxes/bSB2


Ignore:
Timestamp:
Jun 9, 2017, 8:00:28 PM (7 years ago)
Author:
jkol
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/bDomains/cSandboxes/bSB2

    v7 v8  
    33
    44===== RF Connections =====
    5 The X310's connected to the nodes in this sandbox are interconnected via coax cables as follows with a 30dB attenuator on the TX/RX side of each link for protection. This setup is designed to facilitate FDD dependent experiments.
     5 The X310's connected to the nodes in this sandbox are interconnected via coax cables as follows with a 30dB attenuator on the TX/RX side of each link for protection. This setup is designed to facilitate FDD dependent experiments.
    66
    7 [[Image(SB2 X310 Connections.png)]]
     7 [[Image(SB2 X310 Connections.png)]]
    88
    99[[BR]]
    1010===== Using of images based on baseline before June 9, 2017 =====
    11 Images built using baseline prior to June 9, 2017 may not work correctly. After imaging, the node will not be accessible via SSH due to the add-on NIC (for X310 connectivity) changing the order of the ethernet interfaces. To repair your image, connect to the node via the [wiki:Hardware/jCM/dCM3/dUsage#SerialConsoleoverTelnettunnel CM serial console] and run the following commands.
     11 Images built using baseline prior to June 9, 2017 may not work correctly. After imaging, the node will not be accessible via SSH due to the add-on NIC (for X310 connectivity) changing the order of the ethernet interfaces. To repair your image, connect to the node via the [wiki:Hardware/jCM/dCM3/dUsage#SerialConsoleoverTelnettunnel CM serial console] and run the following commands.
    1212
    13 {{{
     13 {{{
    1414echo "blacklist mlx4_core" >> /etc/modprobe.d/blacklist.conf
    1515