| Version 5 (modified by , 11 years ago) ( diff ) |
|---|
Android Development On ORBIT - Node setup
- Setup computer
The ssh connection will use X11 forwarding to display programs on your computer that are running on a remote serve (in this case, an ORBIT node.)
If you are using Linux, ssh and the X window manager are included, so you can skip this section.
If you are using Windows, install Xming and download PuTTY.
- Reserve timeslot
Go to the scheduler and reserve a timeslot
- SSH to console
If you are using Linux, connect using ssh with the X11 forwarding flag
ssh -X [username]@console.[grid].orbit-lab.org
If you are using Windows, first start the Xming window system. Open PuTTY and turn on X11 Forwarding in Connection > SSH > X11 Now connect to console.[grid].orbit-lab.org through PuTTY.
- Load android image
Now you need to load the android development image on a node to work on. You can use
omf stat
to see which nodes are available. To turn a node on or off, use
omf tell command [x,y]
where command is on, offh (hard power), or offs (soft power) and [x,y] is the node.
Choose a node to image (try node2-10… this is a quad-core core processor), preferably a quad core node that can handle Eclipse remotely, and load android2.ndz onto it.
omf load [x,y] android2.ndz
where [x,y] is the node.
It will take several minutes, and omf will turn the node off when it is complete.
Turn the node back on and ssh into it with X11 forwarding
ssh -X root@nodex-y
Now you are in the android development image!
- Start Working
5.1 Application Development
You can start eclipse from the command line using
eclipse &
A new Eclipse window that is running on the node should be on your screen!
The & lets you continue to use the same terminal for more commands. Otherwise you would have to close Eclipse to do anything else. The image has Java 6, Eclipse, Android SDK, and an ARM cross-compiler.
5.2 Experiments with Android Phone
Attached to node4-1 of the outdoor sandbox there is a Evo 4g phone with Cyanogenmod 7.2.0 installed.
If sections 1 to 4 are applied to this node it is possible to run experiments with the phone itself that is enabled to connect through both the wimax and wif interfaces.
To remotely control the phone screencast is already installed in the home folder of the image (use this link for additional information about how to use screencast).
