wiki:Documentation/fSDN/bMininet

Version 1 (modified by ssugrim, 10 years ago) ( diff )

—

Getting started with Mininet

This page documents the usage/installation of mininet as well as it's interaction with OEDL. The main source is the mininet homepage located at ​http://mininet.org/.

0. Installation

While mininet can be installed via an apt-package, the version that is in the repository is very old and does not have some important features so we will instead install by source. References can be found ​here

  1. Install build perquisite packages: 
    apt-get install build-essential git-core
  2. Clone the Repository: 
    apt-get install build-essential git-core
  3. According to the note located ​here, the default install comes with more packages than we need, so instead we will call the install script with the -nv flag 
    mininet/util/install.sh -nv

This will install the base mini-net dependencies with only open-vswitch support. Once installed you can try the pingall test to ensure the installation succeeded: 

root@node1-1:~# sudo mn --test pingall
*** Creating network
*** Adding controller
*** Adding hosts:
h1 h2 
*** Adding switches:
s1 
*** Adding links:
(h1, s1) (h2, s1) 
*** Configuring hosts
h1 h2 
*** Starting controller
c0 
*** Starting 1 switches
s1 
*** Waiting for switches to connect
s1 
*** Ping: testing ping reachability
h1 -> h2 
h2 -> h1 
*** Results: 0% dropped (2/2 received)
*** Stopping 1 controllers
c0 
*** Stopping 1 switches
s1 ..
*** Stopping 2 links

*** Stopping 2 hosts
h1 h2 
*** Done
completed in 0.976 seconds

1. Running the network

As a two-node example, we image the nodes on Sandbox8, as explained in Section 1.1. One is used for the controller, and the other, the Mininet network.

  1. Bring up and assign addresses to eth0 of the nodes. Both should be in the same IP block. If done from console, the commands look like this: 
    $ ssh root@node1-1 "ifconfig eth0 inet 192.168.1.1 up"
$ ssh root@node1-2 "ifconfig eth0 inet 192.168.1.2 up"
    The nodes should now be able to ping eachother via eth0: 
    $ ssh root@node1-1 "ping -c 1 192.168.1.2"
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_req=1 ttl=64 time=0.614 ms

--- 192.168.1.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.614/0.614/0.614/0.000 ms
  1. Start the controller on one node. We arbitrarily pick node1-1. From a shell on node1-1, launch Floodlight: 
    # cd floodlight
# java -jar target/floodlight.jar
    After you give it a few seconds, Floodlight should be listening to port 6633 on all interfaces available on the node (eth0, 1, and lo). If you want, you can start up tcpdump or something similar on a separate terminal on node1-1 to begin capturing control messages: 
    # tcpdump -i lo port 6633
    Alternatively, you can start tcpdump to write to a .pcap file for later analysis with wireshark with the OpenFlow plugin. 
    # tcpdump -w outfile.pcap -i lo port 6633
  2. Launch Mininet. From another shell on node1-2: 
    # mn --topo=single,2 --controller=remote,ip=192.168.1.1
    This will give you a virtual network of two hosts and one switch pointed to the running Floodlight instance on node1-1. Once at the prompt, try pinging one host from the other: 
    mininet> h1 ping h2
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_req=1 ttl=64 time=8.19 ms
64 bytes from 10.0.0.2: icmp_req=2 ttl=64 time=0.164 ms
64 bytes from 10.0.0.2: icmp_req=3 ttl=64 time=0.025 ms
64 bytes from 10.0.0.2: icmp_req=4 ttl=64 time=0.024 ms
^C
--- 10.0.0.2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.024/2.101/8.193/3.517 ms

Notice how the first ping takes much longer. This is due to the flow installation process triggered by the first ping (Specifically, the ARPs sent by the hosts) as the switch suffers a flow table miss. At the same time, you should see (lots of) packets being captured by tcpdump in node1-1's terminal: 

root@node1-1:~/floodlight# tcpdump -i eth0 port 6633
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
20:18:30.188181 IP 192.168.1.2.41631 > 192.168.1.1.6633: Flags [S], seq 3242563912, win 14600, options [mss 1460,sackOK,TS val 699854 ecr 0,nop,wscale 4], length 0
20:18:30.188321 IP 192.168.1.1.6633 > 192.168.1.2.41631: Flags [S.], seq 2665849071, ack 3242563913, win 14480, options [mss 1460,sackOK,TS val 700809 ecr 699854,nop,wscale 4], length 0
20:18:30.188466 IP 192.168.1.2.41631 > 192.168.1.1.6633: Flags [.], ack 1, win 913, options [nop,nop,TS val 699854 ecr 700809], length 0
20:18:30.188618 IP 192.168.1.2.41631 > 192.168.1.1.6633: Flags [F.], seq 1, ack 1, win 913, options [nop,nop,TS val 699854 ecr 700809], length 0
20:18:30.190310 IP 192.168.1.1.6633 > 192.168.1.2.41631: Flags [.], ack 2, win 905, options [nop,nop,TS val 700810 ecr 699854], length 0
20:18:30.224204 IP 192.168.1.1.6633 > 192.168.1.2.41631: Flags [P.], seq 1:9, ack 2, win 905, options [nop,nop,TS val 700818 ecr 699854], length 8
20:18:30.224426 IP 192.168.1.2.41631 > 192.168.1.1.6633: Flags [R], seq 3242563914, win 0, length 0
20:18:30.402564 IP 192.168.1.2.41632 > 192.168.1.1.6633: Flags [S], seq 1611313095, win 14600, options [mss 1460,sackOK,TS val 699908 ecr 0,nop,wscale 4], length 0
20:18:30.402585 IP 192.168.1.1.6633 > 192.168.1.2.41632: Flags [S.], seq 367168075, ack 1611313096, win 14480, options [mss 1460,sackOK,TS val 700863 ecr 699908,nop,wscale 4], length 0
...

1.2.1 Using Wireshark

In the above example, tcpdump can be replaced by wireshark. Wireshark is "friendlier" in that it has a GUI and an OpenFlow dissector plugin is available for it. In order to use Wireshark, you must enable X11 forwarding from your workstation to the node, with the -X or -Y flag for ssh e.g.: 

ssh -X -l root node1-1

1.2.2 Using OpenVswitch directly

Mininet's datapaths are backed by OVS. Therefore, if you have a Mininet install, you get OVS for "free". You can use OVS directly for your data plane.

II More complex examples

It is possible to run multiple instances of controllers (for whatever reason), or different logical components together in the same network. This section shows two examples of more complex SDN network setups - multiple controller instances and with FlowVisor, a network hypervisor.

Sections

2.1 Multiple Controllers
2.2 Network virtualization/slicing

2.1 Multiple Controllers

You may have multiple controllers in the same logical space of the control plane for various reasons - special applications, fail-over, distributed control planes, etc.

  • 2.1.1 On multiple hosts
  • 2.1.2 On the same host

2.1.1 On multiple hosts

If each controller is running on its own host (machine, VM, etc.), there is little to change; if you have hosts A,B, and C, and Floodlight instances running on each, switches can be pointed to targets A:6633, B:6633, C:6633, or any combination thereof (switches can be pointed to multiple controllers).

2.1.2 On the same host

The Floodlight configuration file

Multiple instances of Floodlight may be run on the same host, as long as each controller listens on a separate set of sockets. In this case, all controllers would be on the same IP address(es), so you must change the ports they are listening on. These ports include the OpenFlow control port (TCP 6633), REST API (TCP 8080), and debug (TCP 6655).

In Floodlight, this value can be changed by modifying the file floodlightdefault.properties, located in src/main/resources/ of the Floodlight sources. (Currently) It looks like this: 

floodlight.modules=\
net.floodlightcontroller.jython.JythonDebugInterface,\
net.floodlightcontroller.counter.CounterStore,\
net.floodlightcontroller.storage.memory.MemoryStorageSource,\
net.floodlightcontroller.core.internal.FloodlightProvider,\
net.floodlightcontroller.threadpool.ThreadPool,\
net.floodlightcontroller.devicemanager.internal.DeviceManagerImpl,\
net.floodlightcontroller.devicemanager.internal.DefaultEntityClassifier,\
net.floodlightcontroller.staticflowentry.StaticFlowEntryPusher,\
net.floodlightcontroller.firewall.Firewall,\
net.floodlightcontroller.forwarding.Forwarding,\
net.floodlightcontroller.linkdiscovery.internal.LinkDiscoveryManager,\
net.floodlightcontroller.topology.TopologyManager,\
net.floodlightcontroller.flowcache.FlowReconcileManager,\
net.floodlightcontroller.debugcounter.DebugCounter,\
net.floodlightcontroller.debugevent.DebugEvent,\
net.floodlightcontroller.perfmon.PktInProcessingTime,\
net.floodlightcontroller.ui.web.StaticWebRoutable,\
net.floodlightcontroller.loadbalancer.LoadBalancer,\
org.sdnplatform.sync.internal.SyncManager,\
org.sdnplatform.sync.internal.SyncTorture,\ 
net.floodlightcontroller.devicemanager.internal.DefaultEntityClassifier
org.sdnplatform.sync.internal.SyncManager.authScheme=CHALLENGE_RESPONSE
org.sdnplatform.sync.internal.SyncManager.keyStorePath=/etc/floodlight/auth_credentials.jceks
org.sdnplatform.sync.internal.SyncManager.dbPath=/var/lib/floodlight/

Several entries can be added to this list to tweak TCP port values. Unfortunately, these entries may change fairly frequently due to active development.

  • net.floodlightcontroller.restserver.RestApiServer.port = 8080
  • net.floodlightcontroller.core.internal.FloodlightProvider.openflowport = 6633
  • net.floodlightcontroller.jython.JythonDebugInterface.port = 6655

Each entry should be on its own line, with no spaces or newlines in between lines. For example, to change the port that Floodlight listens for switches on from the default of 6633 to 6634, append: 

net.floodlightcontroller.core.internal.FloodlightProvider.openflowport = 6634

To the .properties file. Then, point Floodlight to the configuration file with the -cf flag: 

java -jar target/floodlight.jar -cf src/main/resources/floodlightdefault.properties

The file specified after -cf will be read in, and the values in it used to configure the controller instance. You should be able to confirm the change: 

# netstat -nlp | grep 6634
...
tcp6       0      0 :::6634                 :::*                    LISTEN      2029/java       
...

Launching multiple controllers

Each instance of the controller run on the same host can be pointed to its own .properties file with the -cf flag, with different port value parameters. Begin by making as many copies of the default .properties file as you will have controllers. Going with a similar example as earlier, you can have one host A and three Floodlight instances 1,2, and 3, configured as below:

1 2 3
FloodlightProvider.openflowport 6633 6634 6635
RestApiServer.port 8080 8081 8082
JythonDebugInterface.port 6655 6656 6657

No ports should be shared by the three instances, or else they will probably throw errors at startup and exit shortly after. With a .properties file for each instance under resources/ (named 1,2, and 3.properties for this example), you can launch the controllers in a loop for example: 

for i in `seq 1 3`; do
   java -jar target/floodlight.jar -cf src/main/resources/$i.properties 1>/dev/null 2>&1 &
done

This should launch three backgrounded instances of Floodlight.

2.2 Network virtualization/slicing

A more typical case you might encounter is a network that is sliced, or virtualized.

  • 2.2.1 A brief intro to network virtualization
  • 2.2.2 Virtualization with multiple hosts
  • 2.2.3 On the same host

2.2.1 A brief intro to network virtualization

A virtualized network is organized as below: 

[controller 1] [controller 2] [controller 3]
             \       |       /
              \      |      /
            [network hypervisor]-[policies]
                     |
                  [network]

A network hyperviser like ​FlowVisor sits between the control and data plane, intercepting and re-writing the contents of the OpenFlow control channel to one or more controllers running independently of one another. Ultimately, the network hypervisor provides each controller with an illusion that it is the only controller in the network. It accomplishes this by

  1. Rewriting the topology information conveyed by OpenFlow (in the form of PORT_STATs and PacketIns triggered by LLDP messages) before it reaches each controller, allowing it to only work on a subset, or slice, of the network, and
  2. Mapping the PacketIns/PacketOuts to and from each controller to the proper sets of switches and switch ports.

How the re-writing occurs depends on a set of admin-defined policies.

2.2.2 Virtualization with multiple hosts

We begin by introducing a simple example of a virtualized topology: 

[Floodlight 1] [Floodlight 2]
           \    /
         [FlowVisor]
              |
          [Mininet]

Each component above will be run on a separate node. Since we need more than two nodes, you may want to reserve either Sandboxes 4 or 9. The components can also be run on the same node, with the caveats discussed in the next section, 2.2.3.

Here, Mininet will be used to emulate a three-switch, three-host data plane: 

h1   h2   h3
 |    |    | 
s1---s2---s3

This data plane will be sliced so that one Floodlight instance will control switches s1 and s2, and the other, s3.

2.2.3 On the same host

As with the case of multiple controllers on the same VM/host, you must be careful that neither FlowVisor nor the controllers listen on the same sets of ports. For the multiple controllers, this can be avoided as described in Section 2.1.2. FlowVisor and Floodlight conflict on ports 6633 and 8080.

III Installation

The following are the installation steps and basic usage for the software that are found on the image. For more information, refer to their respective pages; Floodlight and Mininet in particular have very thorough docs.

Quick links:

3.1 Floodlight
3.2 Mininet
3.3 CBench
3.4 liboftrace
3.5 Wireshark
3.6 FlowVisor

Note, the following examples are for Ubuntu, since that's what is used at WINLAB. A quick search will often bring up hints/steps for CentOS/RHEL and OSX, but for the most part, you will have to experiment a bit.

3.1 Floodlight

docs: ​http://docs.projectfloodlight.org/display/floodlightcontroller/Floodlight+Documentation

For the most part the following is a repetition of some of the things there. Truth be told, if you plan to modify/develop on Floodlight it is better to just install it on a local machine where you can use eclipse (either that, or you can try to X11 forward, but that doesn't always go well).

dependencies

sudo apt-get install git-core build-essential default-jdk ant python-dev eclipse

installation

The following fetches and builds the latest stable release: 

git clone git://github.com/floodlight/floodlight.git
cd floodlight
git checkout fl-last-passed-build
ant

To import as a project on Eclipse, run the following while in the same directory: 

ant eclipse

run

Assuming everything worked out: 

java -jar target/floodlight.jar

from the floodlight/ directory launches Floodlight. It will output a bunch of messages while it searches for, loads, and initializes modules. You can refer to the output attached below for what it should look like - there may be warnings, but they should be harmless.

This command also launches in the foreground, so you can either launch it in a terminal multiplexer like screen or tmux, or with a 1>logfile 2>&1 & tacked to the end. The former is probably recommended.

development

Tutorials and other information can be found here: ​http://docs.projectfloodlight.org/display/floodlightcontroller/For+Developers

3.2 Mininet

website: ​http://mininet.org/
It is highly recommended to run trough the docs, especially the following:

If you post to the list especially before you read the FAQ's, you will likely just be asked if you have checked them.

installation/build

The ​VM is the recommended way to run Mininet on your machine.
The following is for a native install (as on the node image).

The method differs for different versions of Ubuntu. The following is for 12.04. For others, refer to ​this page. The following also takes care of the dependencies. 

sudo apt-get install mininet/precise-backports

Then disable ovs-controller: 

sudo service openvswitch-controller stop
sudo update-rc.d openvswitch-controller disable

You may also need to start open Vswitch: 

sudo service openvswitch-switch start

You can verify that it works with the following: 

sudo mn --test pingall

This sets up a 2-host, 1-switch topology and pings between the hosts. The output looks similar to this: 

*** Creating network
*** Adding controller
*** Adding hosts:
h1 h2 
*** Adding switches:
s1 
*** Adding links:
(h1, s1) (h2, s1) 
*** Configuring hosts
h1 h2 
*** Starting controller
*** Starting 1 switches
s1 
*** Ping: testing ping reachability
h1 -> h2 
h2 -> h1 
*** Results: 0% dropped (0/2 lost)
*** Stopping 2 hosts
h1 h2 
*** Stopping 1 switches
s1 ...
*** Stopping 1 controllers
c0 
*** Done
completed in 0.460 seconds

run

There are many flags and options associated with launching Mininet. mn --help will display them.
For example, to start the same topology as the pingall test, but with a controller running separately from Mininet: 

# mn --topo=single,2 --controller=remote,ip=10.18.1.1 --mac
*** Creating network
*** Adding controller
*** Adding hosts:
h1 h2 
*** Adding switches:
s1 
*** Adding links:
(h1, s1) (h2, s1) 
*** Configuring hosts
h1 h2 
*** Starting controller
*** Starting 1 switches
s1 
*** Starting CLI:
mininet>
  • —topo=single,2 : one switch with two hosts
  • —controller=remote,ip=10.18.1.1 : controller at 10.18.1.1
  • —mac : non-random MAC addresses

Some useful ones are:

  • controller external to Mininet, at IP addr and port p: 
    --controller=remote,ip=[addr],port=[p]
  • non-random host MAC addresses (starting at 00:00:00:00:00:01 for h1) 
    --mac

usage

You can find available commands for the command line by typing ? at the prompt. exit quits Mininet.
Some basic examples:

  • display topology: 
    mininet> net
c0
s1 lo:  s1-eth1:h1-eth0 s1-eth2:h2-eth0
h1 h1-eth0:s1-eth1
h2 h2-eth0:s1-eth2
  • display host network info: 
    mininet> h1 ifconfig
h1-eth0   Link encap:Ethernet  HWaddr 00:00:00:00:00:01  
          inet addr:10.0.0.1  Bcast:10.255.255.255  Mask:255.0.0.0
          inet6 addr: fe80::200:ff:fe00:1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:135 errors:0 dropped:124 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:8906 (8.9 KB)  TX bytes:558 (558.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
  • ping host 1 from host 2 
    mininet> h2 ping h1
PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
64 bytes from 10.0.0.1: icmp_req=1 ttl=64 time=10.0 ms
^C
--- 10.0.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 10.026/10.026/10.026/0.000 ms

scripting

Mininet has a Python API, whose docs can be found online: ​http://mininet.org/api/
Examples can also be found here: ​https://github.com/mininet/mininet/tree/master/examples

Once you write a script, you can run it as a script: 

python mn_script.py

3.3 Cbench

website: ​http://docs.projectfloodlight.org/display/floodlightcontroller/Cbench+(New)

dependencies

sudo apt-get install autoconf automake libtool libsnmp-dev libpcap-dev

installation/build

git clone git://gitosis.stanford.edu/openflow.git
cd openflow; git checkout -b mybranch origin/release/1.0.0
git clone git://gitosis.stanford.edu/oflops.git
git submodule init && git submodule update
wget http://hyperrealm.com/libconfig/libconfig-1.4.9.tar.gz
tar -xvzf libconfig-1.4.9.tar.gz
cd libconfig-1.4.9
./configure
sudo make && sudo make install
cd ../oflops/
sh ./boot.sh ; ./configure --with-openflow-src-dir=${OF_PATH}/openflow/
make install

Where OF_PATH is where you had cloned the OpenFlow repository to.

run

Run from the cbench directory under oflops: 

cd cbench 
cbench -c localhost -p 6633 -m 10000 -l 10 -s 16 -M 1000 -t
  • -c localhost : controller at loopback
  • -p 6633 : controller listaning at port 6633
  • -m 10000 : 10000 ms (10 sec) per test
  • -l 10 : 10 loops(trials) per test
  • -s 16 : 16 emulated switches
  • -M 1000 : 1000 unique MAC addresses(hosts) per switch
  • -t : throughput testing

for the complete list, use the -h flag.

The output for the above command looks like this: 

cbench: controller benchmarking tool
   running in mode 'throughput'
   connecting to controller at localhost:6633 
   faking 16 switches offset 1 :: 3 tests each; 10000 ms per test
   with 10 unique source MACs per switch
   learning destination mac addresses before the test
   starting test with 0 ms delay after features_reply
   ignoring first 1 "warmup" and last 0 "cooldown" loops
   connection delay of 0ms per 1 switch(es)
   debugging info is off
16:53:14.384 16  switches: flows/sec:  18  18  18  18  18  18  18  18  18  18  18  18  18  18  18  18   total = 0.028796 per ms 
16:53:24.485 16  switches: flows/sec:  20  20  20  20  20  20  20  20  20  20  20  20  20  20  20  20   total = 0.031999 per ms 
16:53:34.590 16  switches: flows/sec:  24  24  24  24  24  24  24  24  24  24  24  24  24  24  24  24   total = 0.038380 per ms 
RESULT: 16 switches 2 tests min/max/avg/stdev = 32.00/38.38/35.19/3.19 responses/s

3.4 liboftrace (ofdump/ofstats)

docs:

​https://github.com/capveg/oftrace/blob/master/README
​http://www.openflow.org/wk/index.php/Liboftrace

dependencies

sudo apt-get install libpcap-dev swig libssl-dev

installation/build

git clone git://github.com/capveg/oftrace.git
cd oftrace
./boot.sh
./configure --with-openflow-src-dir=${OF_PATH}/openflow/
make && make install

run

There are two tools pre-packaged with liboftrace (as per a ​mailing-list entry):

  1. ofstats: a program which calculates the controller processing delay, i.e., the difference in time between a packet_in message and the corresponding packet_out or flow_mod message.
  2. ofdump: a program that simply lists openflow message types with timestamps by switch/controller pair.

Both have the same syntax: 

[ofstats|ofdump] [controller IP] [OF port]

Without the arguments it defaults to localhost:6633.

For example, with a pcap file named sample.pcap from a tcpdump session sniffing for traffic from a controller at 192.168.1.5, port 6637:
ofdump: 

# ofdump sample.pcap 192.168.1.5 6637
DBG: tracking NEW stream : 192.168.1.5:6637-> 192.168.1.6:47598 
DBG: tracking NEW stream : 192.168.1.6:47598-> 192.168.1.5:6637 
FROM 192.168.1.5:6637           TO  192.168.1.6:47598   OFP_TYPE 0      LEN 8   TIME 0.000000
FROM 192.168.1.6:47598          TO  192.168.1.5:6637    OFP_TYPE 0      LEN 8   TIME 0.026077
FROM 192.168.1.5:6637           TO  192.168.1.6:47598   OFP_TYPE 5      LEN 8   TIME 0.029839
FROM 192.168.1.6:47598          TO  192.168.1.5:6637    OFP_TYPE 6      LEN 128 TIME 0.1070415

...

FROM 192.168.1.6:47598          TO  192.168.1.5:6637    OFP_TYPE 10     LEN 60  TIME 0.2038485
 --- 2 sessions:  0 0
FROM 192.168.1.5:6637           TO  192.168.1.6:47598   OFP_TYPE 13     LEN 24  TIME 0.2038523
FROM 192.168.1.6:47598          TO  192.168.1.5:6637    OFP_TYPE 10     LEN 60  TIME 0.2038573
FROM 192.168.1.5:6637           TO  192.168.1.6:47598   OFP_TYPE 13     LEN 24  TIME 0.2038614
FROM 192.168.1.6:47598          TO  192.168.1.5:6637    OFP_TYPE 10     LEN 60  TIME 0.2038663
FROM 192.168.1.5:6637           TO  192.168.1.6:47598   OFP_TYPE 13     LEN 24  TIME 0.2038704
Total OpenFlow Messages: 20015

ofstats: 

# ofstats sample.pcap 192.168.1.5 6637  
Reading from pcap file 1.pcap for controller 192.168.1.5 on port 6637
DBG: tracking NEW stream : 192.168.1.5:6637-> 192.168.1.6:47598 
DBG: tracking NEW stream : 192.168.1.6:47598-> 192.168.1.5:6637 
0.008088        secs_to_resp buf_id=333 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 0 queued
0.000454        secs_to_resp buf_id=334 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 2 queued
0.000437        secs_to_resp buf_id=335 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 1 queued
0.000534        secs_to_resp buf_id=336 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 0 queued
0.000273        secs_to_resp buf_id=337 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 2 queued
0.000486        secs_to_resp buf_id=338 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 2 queued
0.000379        secs_to_resp buf_id=339 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 1 queued
0.000275        secs_to_resp buf_id=340 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 0 queued
...
0.000135        secs_to_resp buf_id=10330 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 1 queued
0.000132        secs_to_resp buf_id=10331 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 1 queued
0.000131        secs_to_resp buf_id=10332 in flow 192.168.1.5:6637 -> 192.168.1.6:47598 - packet_out - 0 queued

Since the outputs are dumped to stdout it is probably best to redirect it to a file for parsing later, like so: 

# ofstats sample.pcap 192.168.1.5 6637 > outfile

3.5 Wireshark

website(wireshark): ​http://www.wireshark.org
docs(plugin): ​https://bitbucket.org/barnstorm/of-dissector

dependencies

wireshark(source): 

sudo apt-get install libpcap-dev bison flex libgtk2.0-dev build-essential

plugin: 

sudo apt-get install scons mercurial

installation/build

You need the source for Wireshark to build the plugin. At the time of this writing Wireshark is at v.1.10. 

wget http://wiresharkdownloads.riverbed.com/wireshark/src/wireshark-1.10.0.tar.bz2
tar -xjf wireshark-1.10.0.tar.bz2 
cd wireshark-1.10.0/
./configure

The above is sufficient for the plugin. Installing Wireshark from source e.g. with make;make install can take a while, so you may choose to install the binary, i.e. do: 

apt-get install wireshark

If you decide to build from source, also install libwiretap1.

Next fetch and build the plugin: 

hg clone https://bitbucket.org/barnstorm/of-dissector
cd of-dissector/
export WIRESHARK=${WS_ROOT}/wireshark-1.10.0/
cd src
scons install
cp openflow.so /usr/lib/wireshark/libwireshark1/plugins/

Where ${WS_ROOT} is the directory you've untarred the Wireshark source to. The plugin directory may also differ depending on if you installed Wireshark from source or not - if you did, the path will be something similar to /usr/local/lib/wireshark/plugins/1.10.0/

run

Run Wireshark as root: 

sudo wireshark

You should see openflow.so in the list of plugins if you go to Help > About Wireshark > plugins.

3.6 FlowVisor

website: ​http://onlab.us/flowvisor.html

Note: See TracWiki for help on using the wiki.