Changes between Version 4 and Version 5 of Documentation/dSDR/GNURadio

Timestamp:

Jan 15, 2010, 2:41:15 AM (15 years ago)

Author:

seskar

Comment:

—

Documentation/dSDR/GNURadio

@@ -5 +5 @@
 = USRP =
 
+Universal Software Radio Peripheral is a USB based board intended to be a hardware front-end of the GNU Radio software. It comes in two versions: USRP and USRP2. Both version share the same expansion interface for RF daughterboards. Following RF confiurations are currently deployed in Orbit:
 
  * Basic RX (and Basic TX) - 2 - 200 MHz
@@ -16 +17 @@
 == USRP (1) ==
 
-Uses USB and has 2 RX/TX chains and thus supports up to 2 transciever boards. There are 9 USRPs in the main grid and 2 USRPs in sandbox5 that are attached to the Orbit node.
+USB and has 2 RX/TX chains and thus supports up to 2 transciever boards. There are 9 USRPs in the main grid and 2 USRPs in sandbox5 that are each attached to one of the Orbit nodes as shown in the following table:
 
 {{{
@@ -64 +65 @@
 || ![1,1] || XCVR-2450 ||
 || ![1,2] || XCVR-2450 ||
+
+== GNU Radio HowTo ==
+ 
+ * [wiki:Documentation/GNURadio/Installation Installing GNU Radio on the node]
+
+== ORBIT GNU Radio Tutorials ==
+
+ * [wiki:Documentation/GNURadio/Tutorials/GettingStarted Getting started with GNU Radio in Orbit]
+ * [wiki:Documentation/GNURadio/Tutorials/MacSwitch  MAC protocols adaption]