Changes between Version 2 and Version 3 of DSC/dc_trial1

Timestamp:

Jun 10, 2013, 12:33:39 PM (11 years ago)

Author:

seskar

Comment:

—

DSC/dc_trial1

@@ -8 +8 @@
 == Hardware / Software Resources utilized ==
  1. Two grid nodes with USRPs.
- 2. ''baseline-gnu-12-04-32bit.ndz'': disk image loaded onto nodes. This image has all the precompiled - software required to configure the USRPs and analyze recorded data. The USRP2's interface with the node is already configured.
+ 2. ''baseline-gnu-12-04-32bit.ndz'': disk image loaded onto nodes. This image has all the pre-compiled - software required to configure the USRPs and analyze recorded data. The USRP2's interface with the node is already configured.
  3. Orbit's Arbitrary Waveform Injection System: used to inject noise or simple signal into RF environment. [http://www.orbit-lab.org/wiki/Software/bAM/mInterf#InterferenceAggregateManager More information of this generator can be found here.]
  4. Packet server: This is server that resides on the grid console and used by a transmitting node to send data packets over the air via USRP.
@@ -14 +14 @@
 
 == Set up ==
- * To get started first make a reservation on the [https://www.orbit-lab.org/schedule/ Orbit Scheduler] for using the Grid.
+ * To get started first make a reservation on the [https://www.orbit-lab.org/loginService/ControlPanel Orbit Scheduler] for using the Grid.
 
  * After logging into grid console, make sure all nodes are turned off