wiki:Old/hNodes/cNodeVer3/dAssembly/e4NodesSetup

Version 18 (modified by ParviK, 11 years ago) ( diff )

GENI Configuration assembly

Requires:

— LV-67J — Assemble as with G except: (put link to node specific page)

  • 1 160GB HDD on tray, with standoffs (add picture)
  • Power button in back panel
  • No CM
  • Intel 1000T NIC adapter

— LV-67K — Assemble as with G except: (put link to node specific page)

  • DO NOT CONNECT 4 PIN ATX12V POWER CABLE
  • Mobile node uses connector for 12V dc input, with 24 pin connector acting as output. Connecting both will damage board.

  • Connect new CM, attach to back panel with angle bracket, #440 screws. Choose beveled or pan head appropriately.
  • Use 60gb SSD on tray, with standoffs. (add picture)
Installing the base OS
Console Machine Disk Partitioning

While setting up Ubuntu server, partition the disk as follows:

  • 20 GB Primary boot partition
  • 20 GB Home directory
  • 116 GB create a new mount point /Export for images
  • 4 GB Swap . Set the 'location' as end, and set 'use as' to swap area.
  • 35 MB EFI boot partition
Network setup and configuration
  • Three networks
  • Data
  • CM
  • Control
  • 3 switches, 1 partitioned switch, or single cable out.
One unmanaged switch per subnet

Single managed switch

Single trunk per node

Software Configuration

Add the following line to the /etc/apt/sources.list

deb http://pkg.mytestbed.net/ubuntu precise/

Attachments (3)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.