Changes between Version 34 and Version 35 of Hardware/fDevices/cSDR/gUSRP


Ignore:
Timestamp:
May 4, 2015, 11:22:27 PM (9 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/fDevices/cSDR/gUSRP

    v34 v35  
    1 ==== USRP devices ====
     1
    22
    33[[TOC(Hardware/fDevices,Hardware/fDevices/*, depth=5)]]
    4 
    5 The majority  of SDR devices in the ORBIT grid are various generations of [http://en.wikipedia.org/wiki/Universal_Software_Radio_Peripheral Universal Software Radio Peripherals (USRP)] . Each USRP, whether USB or Ethernet based, is attached to a [wiki:Hardware/hNodes/cNodeVer3 generation 3 node] and is physically located on a small shelf immediately underneath the node (as shown in the antenna figure below).
    6 
    7 In the case of USRP devices, the USB interface is attached to one of the USB2 ports on a corresponding node. For USRP2s (and N210s), the Ethernet interface of each device is connected to a (third) dedicated Ethernet interface on the node (eth2) that is used solely for USRP related communication.
    8 
    9 The USRP X310s are attached to the new [wiki:Hardware/hNodes/cNodeVer4 generation 4 nodes]. They are attached to a 10 Gigabit NIC on the node via SFP+ direct attach cable, and are attached via fiber to our aggregate switch. (Note, fiber link is still undergoing testing/debugging.)
    10 
    11 The nodes with USRP devices are distributed through the grid as shown in the [wiki:Hardware/fDevices/cSDR/gUSRP#grid deployment table]. In addition to grid deployment two sandboxes are available for development: [wiki:Hardware/bDomains/cSandboxes/cSB3 sandbox3] is equipped with [wiki:Hardware/fDevices/cSDR/gUSRP#sb3 two USRP2s], while [wiki:Hardware/bDomains/cSandboxes/eSB5 sanbox5] has [wiki:Hardware/fDevices/cSDR/gUSRP#sb5 two USRPs] attached.
    124
    135==== USRP (1) ====
    … …  
    4739 || Driver ||  [http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux UHD] ||
    4840
    49 ==== USRP Antenna Mounting ====
     41
     42==== ORBIT USRP Deployment ====
     43
     44The majority  of SDR devices in the ORBIT grid are various generations of [http://en.wikipedia.org/wiki/Universal_Software_Radio_Peripheral Universal Software Radio Peripherals (USRP)] . Each USRP, whether USB or Ethernet based, is attached to a [wiki:Hardware/hNodes/cNodeVer3 generation 3 node] and is physically located on a small shelf immediately underneath the node (as shown in the antenna table below).
     45
     46In the case of USRP devices, the USB interface is attached to one of the USB2 ports on a corresponding node. For USRP2s (and N210s), the Ethernet interface of each device is connected to a (third) dedicated Ethernet interface on the node (eth2) that is used solely for USRP related communication.
     47
     48The USRP X310s are attached to the new [wiki:Hardware/hNodes/cNodeVer4 generation 4 nodes]. They are attached to a 10 Gigabit NIC on the node via SFP+ direct attach cable, and are attached via fiber to our aggregate switch. (Note, fiber link is still undergoing testing/debugging.)
     49
     50The nodes with USRP devices are distributed through the grid as shown in the [wiki:Hardware/fDevices/cSDR/gUSRP#grid deployment table]. In addition to grid deployment two sandboxes are available for development: [wiki:Hardware/bDomains/cSandboxes/cSB3 sandbox3] is equipped with [wiki:Hardware/fDevices/cSDR/gUSRP#sb3 two USRP2s], while [wiki:Hardware/bDomains/cSandboxes/eSB5 sanbox5] has [wiki:Hardware/fDevices/cSDR/gUSRP#sb5 two USRPs] attached.
     51
     52===== USRP Antenna Mounting =====
    5053
    5154 ||  USRP  ||  USRP2 / USRP N210  || USRP X310 || USRP B210 ||
    5255 || [[Image(USRP Antenna Placement.jpg,width=200)]] || [[Image(SBX Antenna Placement.jpg,width=200)]] || [[Image(IMG_3941.JPG,width=200)]] || [[Image(IMG_3943.JPG,width=200)]] ||
    53 
    54 
    5556===== USRP Deployment Maps =====
    5657