== Working with GNURadio and Nutaq ZeptoSDR == [[TOC(Tutorials/k0SDR*)]] === Description === This example will demonstrate how to use GRC (GNU Radio Companion) with [wiki:Hardware/fDevices/cSDR/hNutaq#NutaqZeptoSDR Nutaq's Zepto SDR]. === Set up === * Before you can access the testbed, you need to [https://www.orbit-lab.org/schedule make a reservation] and get it approved by the [wiki:Documentation/Scheduler reservation service]. After receiving the reservation's confirmation (approval) email, load the ''ubuntu-14-04-64bit-sdr.ndz'' on two nodes and turn them on - one node with a Zepto SDR and the other node a USRP. For this example we'll use node20-13 and node20-20 which have a Zepto SDR and USRP, respectively: * [[CollapsibleStart(Login into reserved domain: ssh username@sb3.orbit-lab.org)]][[Include(Documentation/Short/Login)]][[CollapsibleEnd]] * [[CollapsibleStart(Load an image on the nodes: omf load -i ubuntu-14-04-64bit-sdr.ndz -t [[20,13],[20,20]])]] [[Include(Documentation/Short/LoadImage)]][[CollapsibleEnd]] * [[CollapsibleStart(Turn on the nodes: omf tell -a on -t [[20,13],[20,20]])]][[Include(Documentation/Short/TellOn)]][[CollapsibleEnd]] Once the nodes boot up, verify that the interface to each SDR is configured correctly. '''Verify connection to Zepto SDR:''' {{{ ifconfig eth2 192.168.0.1 netmask 255.255.255.0 mtu 9000 up ping 192.168.0.101 }}} '''Verify connection to USRP:''' {{{ ifconfig eth2 192.168.10.1 netmask 255.255.255.0 mtu 9000 up ping 192.168.10.2 }}} === Run the GRC scripts === Download the receiver ''zepto_rx.grc'' into node20-13 and open it with GNU Radio Companion. {{{ root@node20-13:~# cd /opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples root@node20-13:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples# wget http://www.orbit-lab.org/raw-attachment/wiki/Tutorials/k0SDR/Tutorial10/zepto_rx.grc root@node20-13:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples# cd .. root@node20-13:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq#sh launch_gnuradio_companion.sh & }}} A window should pop up similar to the following: || [[Image(zepto_rx.png, width=500px)]] || Next download the transmitting side ''usrp_tx.grc'' and open with GNU Radio Companion. {{{ root@node20-20:~# wget http://www.orbit-lab.org/raw-attachment/wiki/Tutorials/k0SDR/Tutorial10/usrp_tx.grc root@node20-20:~# gnuradio-companion }}} A window should pop up similar to the following: || [[Image(usrp_tx.png, width=500px)]] || On both GRC windows click on the execute (side ways triangular) button to start both scripts. On the receiver side and spectrum window should open showing a carrier frequency. The details of the center frequency, power, gain, etc are in the GRC files - tweak a some of the parameters and validate by observing the spectrum.