= Working with GNU and Nutaq =

== Description ==
This example will demonstrate how to use GRC (GNU Radio Companion) with Nutaq's Zepto SDR.

== Set up ==
To get started, make a reservation on the grid and then load the ''ubuntu-14-04-64bit-sdr.ndz'' on two nodes - one node with a Zepto SDR and the other node a USRP. For this example we'll use node20-13 and node20-20 which have a Zepto SDR and USRP, respectively.
{{{
nilanjan@console.grid:~$ omf load -i ubuntu-14-04-64bit-sdr.ndz -t [[20,13],[20,20]]
}}}

Turn on both nodes and verify that the interface to each SDR is configured correctly. Verify connection to Zepto SDR:
{{{
ifconfig eth2 192.168.0.1 netmask 255.255.255.0 mtu 9000 up
ping 192.168.0.101
}}}

Verify connection to USRP:
{{{
ifconfig eth2 192.168.10.1 netmask 255.255.255.0 mtu 9000 up
ping 192.168.10.2
}}}

== Run the GRC scripts ==

Download ''zepto_rx.grc'' into node20-13 and open it with GNU Radio Companion.
{{{
root@node1-1:~# cd /opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples
root@node1-1:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples# wget http://www.orbit-lab.org/raw-attachment/wiki/Tutorials/k0SDR/Tutorial10/zepto_rx.grc
root@node1-1:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples# cd ..
root@node1-1:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq#sh launch_gnuradio_companion.sh &
}}}

A window should pop up similar to the following:
  || [[Image(zepto_rx.png, width=500px)]] ||