= System Virtualization = vconsole runs [http://www.xensource.com Xen]. Instances of Xen are configured in {{{/etc/xen/*.cfg}}} and their raw images in {{{/var/img}}}. The Xen host ({{{dom0}}}) is configured in /etc/xen/*.sxp and by our custom bridge creation scripts in {{{/etc/xen/scripts/*-orbit}}}. We have plenty of disk, so we don't bother using LVM2 to share images yet -- each {{{domU}}} has its own full image. Most of the instructions we needed are at [https://help.ubuntu.com/community/XenOnUbuntuBinaryInstall]. Don't use the Xen packages Edgy/universe, run 6.06 like a sensible Ubuntu admin, and install the xensource binary tarball over it using the given script. Seriously. We use specific MAC addresses, and manage them with DHCP as if they were otherwise physical devices. See [wiki:Internal/VMAC]. = Network Virtualization = Here are the VLANs for our virtualized grid. || vlan || name || usual IP range || notes || || 31 || vgrid1-co || 10.71 || command console || || 32 || vgrid1-da || 10.81 || data collection || || 33 || vgrid2-co || 10.72 || command console || || 34 || vgrid2-da || 10.82 || data collection || || 35 || vgrid3-co || 10.73 || command console || || 36 || vgrid3-da || 10.83 || data collection || || 37 || vgrid4-co || 10.74 || command console || || 38 || vgrid4-da || 10.84 || data collection || Here are the IP addresses of the virtual consoles as they interface to their vgrid VLAN. || vgrid side || name || dmz side || || 10.71.0.10 || vconsole1 || 10.50.71.10 || || 10.72.0.10 || vconsole2 || 10.50.72.10 || || 10.73.0.10 || vconsole3 || 10.50.73.10 || || 10.74.0.10 || vconsole4 || 10.50.74.10 || Each virtual console runs on a single system, which has 10.10.0.11 on the regular grid and 10.50.10.11 on the dmz. 10.7n.0.40 is repository2 (frisbee, pxe, and home). 10.7n.0.1 is the PIX interface. The current PIX can only be homed on 25 VLANS, so among these it is only homed on VLAN 31. = Prototype Topology = Absent a sophisticated "tetris-capable" Resource Manager (RM), we simply divide the physical grid into four equal quadrants, each becoming a virtual grid. This "prototype topology" is specifically as follows. || Physical Nodes || vgrid || vx = || vy = || || (1,1) to (10,10) || vgrid1 || x || y || || (11,1) to (20,10) || vgrid2 || x - 10 || y || || (1,11) to (10,20) || vgrid3 || x || y - 10 || || (11,11) to (20,20) || vgrid4 || x - 10 || y - 10 || Each virtual grid addresses nodes from (1,1) to (10,10). It is important to note that all the mechanisms for implementing four vgrids can be extended to support larger quantities of simultaneous experiments without additional hardware. The simple 'vx = x - 10' style of mapping virtual to physical nodes can be modified to support arbitrary non-overlapping mappings without significant redesign of the system.