== Discussion On OpenVZ For ORBIT Virtualization ==

One of the preliminary goals of running OpenVZ on ORBIT
is to allow sharing a node's resources among multiple users.
OpenVZ is a container based virtualization scheme for linux
which works comfortably with the ORBIT boxes running a default
debain distribution.


 == Outline == 
This page should provide you with basic information needed
to go about getting OpenVZ running on the ORBIT boxes.

1. Load the precompied OpenVZ image named "openvz_orbit.ndz" using the omf load command as shown in the 
baseline tutorials.

2. After the nodes are imaged. Turn the nodes on by using the omf 
tell command.

3. Check the number of virtual private servers currently running.
Consult the users guide located here http://download.openvz.org/doc/OpenVZ-Users-Guide.pdf
for more details.

4. Create devices, assign proper IP addreses to physical / virtual devices running on the 
node by using the madwifi driver commands.

5. IP addresses for containers can be updated to ensure proper physical devices
forward and receive packets from the desired physical interface. 

6. Eventually, with proper setup, the user can try and run ping/iperf from a container running on 
one machine to a container running on another machine.

 == Additional Notes ==

1. Details on virtual interfaces:  http://wiki.openvz.org/Virtual_Ethernet_device
 and   http://wiki.openvz.org/Venet

2. Custom template creation with OpenVZ: http://wiki.openvz.org/Debian_template_creation

3. Template cache is present at:  /var/lib/vz/template/cache'