= sw-outside = This is a publicly accessible switch outside of the firewall, making it a bit shady. '''Access :''' 172.16.0.248/16 == switch layout == 12 ports are allocated to external (VLAN 50) and public VLAN 3716. Aside from trunk (port 0/48, VLANs 1,50,and 3715), the rest are non-configured. == VLANs == {{{ Date 2011/03/22 19:30:17 UTC VLAN counts:5 ID Status Fwd/Up /Cfg Name Type Protocol Ext. IP 1 Up 1/ 1/ 18 VLAN0001 Port - - - - 4 50 Up 13/ 13/ 17 external Port - - - - - 901 Down 0/ 0/ 0 VLAN0901 Port - - - - - 3715 Down 0/ 0/ 0 Tango 1 Port - - - - - 3716 Down 0/ 0/ 16 Tango 2 Port - - - - - }}} == Port Assignments == ''switch diagram, followed by output of command `show port vlan`. template for the diagram can be found as attachment below.'' [[Image(sw-outside.jpg)]] {{{ sw-outside# sh po vl Date 2011/03/22 19:34:16 UTC Port Counts: 50 Port Name Status Type VLAN 0/ 1 geth0/1 up Access 50 (external) 0/ 2 geth0/2 up Access 50 (external) 0/ 3 geth0/3 up Access 50 (external) 0/ 4 geth0/4 up Access 50 (external) 0/ 5 geth0/5 up Access 50 (external) 0/ 6 geth0/6 up Access 50 (external) 0/ 7 geth0/7 up Access 50 (external) 0/ 8 geth0/8 up Access 50 (external) 0/ 9 geth0/9 up Access 50 (external) 0/10 geth0/10 up Access 50 (external) 0/11 geth0/11 up Access 50 (external) 0/12 geth0/12 up Access 50 (external) 0/13 geth0/13 down Access 50 (external) 0/14 geth0/14 down Access 50 (external) 0/15 geth0/15 down Access 50 (external) 0/16 geth0/16 down Access 50 (external) 0/17 geth0/17 down Access 3716(Tango 2) 0/18 geth0/18 down Access 3716(Tango 2) 0/19 geth0/19 down Access 3716(Tango 2) 0/20 geth0/20 down Access 3716(Tango 2) 0/21 geth0/21 down Access 3716(Tango 2) 0/22 geth0/22 down Access 3716(Tango 2) 0/23 geth0/23 down Access 3716(Tango 2) 0/24 geth0/24 down Access 3716(Tango 2) 0/25 geth0/25 down Access 3716(Tango 2) 0/26 geth0/26 down Access 3716(Tango 2) 0/27 geth0/27 down Access 3716(Tango 2) 0/28 geth0/28 down Access 3716(Tango 2) 0/29 geth0/29 down Access 3716(Tango 2) 0/30 geth0/30 down Access 3716(Tango 2) 0/31 geth0/31 down Access 3716(Tango 2) 0/32 geth0/32 down Access 3716(Tango 2) 0/33 geth0/33 down Access 1 (VLAN0001) 0/34 geth0/34 down Access 1 (VLAN0001) 0/35 geth0/35 down Access 1 (VLAN0001) 0/36 geth0/36 down Access 1 (VLAN0001) 0/37 geth0/37 down Access 1 (VLAN0001) 0/38 geth0/38 down Access 1 (VLAN0001) 0/39 geth0/39 down Access 1 (VLAN0001) 0/40 geth0/40 down Access 1 (VLAN0001) 0/41 geth0/41 down Access 1 (VLAN0001) 0/42 geth0/42 down Access 1 (VLAN0001) 0/43 geth0/43 down Access 1 (VLAN0001) 0/44 geth0/44 down Access 1 (VLAN0001) 0/45 geth0/45 down Access 1 (VLAN0001) 0/46 geth0/46 down Access 1 (VLAN0001) 0/47 geth0/47 down Access 1 (VLAN0001) 0/48 geth0/48 up Trunk 1,50,3715 0/49 tengeth0/49 down Access 1 (VLAN0001) 0/50 tengeth0/50 down Access 1 (VLAN0001) }}} == Legacy Configurations == none, really. == !OpenFlow configurations == Each VLAN is its own virtual switch. The following is the contents of openflow.conf. {{{ sw-outside# showswitch vlan ports secure channel ---- ----- -------------- 3716 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 connected 29, 30, 31, 32.3716 }}} {{{ sw-outside# cat /mnt/openflow.conf setvsi 3716 17-31,32.3716 tcp 172.16.0.4:6633 dpid 0x001010371600 }}}