= Steps for setting up openairinterface on orbit 1. kernel 1. install kernel 4.7.7 1. issues with changing kernels on xen vm 1. hostnames 1. append the following lines to /etc/hosts: {{{ 127.0.1.1 nano.orbit-lab.org nano 127.0.1.1 hss.orbit-lab.org hss }}} 1. set /etc/hostname to {{{nano}}} 1. hostnamectl may be a workaround 1. to check, you must use {{{getent hosts name}}} 1. getent uses gethostbyname, while host and nslookup query DNS directly 1. GENI workaround 1. on every boot: 1. append to etc/hosts 1. delete etc/hostname 1. run hostnamectl set-hostname nano 1. logout and back in 1. use script to append items to db 1. mmeidentity for user must match index of mme used 1. imsi specified for both user and pdn 1. specify user key with UNHEX function 1. edit line at bottom of hss.config to enable 001 01 plmn 1. fqdn defined in spec 1. GENI 1. EPC URN: {{{urn:publicid:IDN+instageni.rutgers.edu+image+ch-geni-net:OAIEPCOrbit}}} 1. EPC fixed?: {{{urn:publicid:IDN+instageni.rutgers.edu+image+ch-geni-net:oaiepc477}}} 1. newest EPC: {{{urn:publicid:IDN+instageni.rutgers.edu+image+ch-geni-net:epc447scripted}}} 1. eNB URN: {{{urn:publicid:IDN+instageni.rutgers.edu+image+ch-geni-net:OAIeNBRutgers}}} 1. RCC/RRU: 1. EPC needs link on 10.3, for vlan access 1. EPC needs tunnel endpoint on 10.3, or via landing1, for demo sctp 1. RCC needs 10.3 link to mme, as well as link to RRU, in this case tunne, 10.10, or 10.40 1. RRU needs 10.3 to mme, as well as link to RCC (need to work on this, two tunnels? 1. issues: 1. Cannot seem to connect to vlan3701, fia-xia, 10.3.x.x 1. local connection to vlan 60, grid, 10.10 1. need to create connection to vlan 70, outdoor, 10.30