{{{ #!rst List of Common Node Failures ============================ +------------------------------------------------+----------+--------+------------------------------------+ | Failure Mode |# of | List of|Solution - Notes | | |occurences| | | +================================================+==========+========+====================================+ |Pxe Halt - Locks up during execution of PXE code|1 |[1,5] |- Multiple resets (more than 1) | | | | | may be required | | | | |- Might require node Change | +------------------------------------------------+----------+--------+------------------------------------+ |Dead Node ID box top LED (the blinking one) |1 |[1,5] |- Power cycle Fixed it | | | | |- Rabbit Issue? | +------------------------------------------------+----------+--------+------------------------------------+ |First Power on Halt |1 |[3,8] |- Locks during the first attempt | | | |[17,4] |- [3,8] Post after reset | | | | |- [17,4] no serial console output | | | | |- Change node? | +------------------------------------------------+----------+--------+------------------------------------+ |Disk Failure - Not detected on POST |Many |Fix Me |- Change disk | +------------------------------------------------+----------+--------+------------------------------------+ |Disk Failure - Kernel throws write errors |Many |Fix Me |- Change disk | +------------------------------------------------+----------+--------+------------------------------------+ }}}