[[TOC(heading=Tutorial TOC, Tutorial, Tutorial/Testbed, Tutorial/HowtoWriteScripts, Tutorial/HelloWorld, Tutorial/CollectMeasurements, Tutorial/AnalyzeResults, depth=2)]] = ORBIT Radio Grid Testbed Tutorial = The first section of this tutorial briefly describes the '''ORBIT Radio Grid Testbed''', its system architecture and its hardware and software components. The second section describes a simple "Hello World" experiment with one sender and one receiver. The third and concluding section covers each of the steps that may be involved in the design, development, execution and interpretation of an '''ORBIT Radio Grid Testbed''' experiment. To avoid duplicating information that is available elsewhere on this web site, links to other pages on this site will be used. For example, an overview paper on the '''ORBIT Radio Grid Testbed''' is available in Adobe Acrobat here http://www.orbit-lab.org/downloads/publications/Orbit_Overview.pdf. The ORBIT Hardware components are described on this page http://www.orbit-lab.org/doc/design/hardware on this site, and the ORBIT Software Components are described here http://www.orbit-lab.org/doc/design/software. * [wiki:Tutorial/Testbed Brief tour of the Testbed] * [wiki:Tutorial/HowtoWriteScripts How To Write Scripts] * [wiki:Tutorial/HelloWorld Hello World Example] * [wiki:Tutorial/UnderstandingHelloWorld Understanding the helloworld script] * [wiki:Tutorial/CollectMeasurements How measurements are collected] * [wiki:Tutorial/AnalyzeResults Post-processing measurements] * [wiki:Tutorial/LauchApp How to Lauch your application using nodehandler] * [wiki:Tutorial/UseNoise How to Use Noise Generator in the experiment] * [wiki:Tutorial/UsingAODV How to Use AODV in the experiment]