Changes between Version 1 and Version 2 of Tutorials/g0WmLTE/Tutorial4-OAI


Ignore:
Timestamp:
Mar 2, 2015, 2:51:03 PM (9 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/g0WmLTE/Tutorial4-OAI

    v1 v2  
    77=== Prepare the testbed ===
    88
    9  1. [[CollapsibleStart(Load an image on the nodes: "omf load -i  -t inventory:topo:B210")]] [[Include(Documentation/Short/LoadImage)]][[CollapsibleEnd]]
    10 Load the image with the !OpenAirInterface code on the nodes that have USRP B210 attached. After imaging the nodes are '''turned off automatically'''.
    11 
    12  1. [[CollapsibleStart(Turn the nodes on: "omf tell -a on -t system:topo:imaged")]][[Include(Documentation/Short/TellOn)]][[CollapsibleEnd]]
    13 Turn ON the nodes that successfully imaged (give them some time and check their status with '''omf stat''' before proceeding).
     9 1. Load the image with the !OpenAirInterface code on the nodes that have USRP B210 attached. After imaging the nodes are '''turned off automatically'''.
     10 [[CollapsibleStart(Load an image on the nodes: "omf load -i  -t inventory:topo:B210")]] [[Include(Documentation/Short/LoadImage)]][[CollapsibleEnd]]
     11 1. Turn ON the nodes that successfully imaged (give them some time and check their status with '''omf stat''' before proceeding). [[CollapsibleStart(Turn the nodes on: "omf tell -a on -t system:topo:imaged")]][[Include(Documentation/Short/TellOn)]][[CollapsibleEnd]]