Changes between Version 12 and Version 13 of Tutorials/g0WmLTE/Tutorial4-OAI

Timestamp:

Mar 4, 2015, 9:06:48 PM (9 years ago)

Author:

shsagari

Comment:

—

Tutorials/g0WmLTE/Tutorial4-OAI

@@ -16 +16 @@
 
 Primary objective is to establish the LTE connection between the UE and eNB. node6-20 = eNB node19-18 = UE...
- 
+1. In oai.conf file, make sure to have correct IP address configuration for parameters "ENB_IPV4_ADDRESS_FOR_S1_MME" and "ENB_IPV4_ADDRESS_FOR_S1U" to match node numbers. For example, for nodeX-Y, these IP address parameters become as "10.10.X.Y/16".
+
+1. Execute commands as
 
  || On the eNB node (node6-20) || On the UE node (node19-18)  ||    ||
- ||  lte-softmodem -Ooai.conf   || lte-softmodem -U Ooai.conf || with MME support ||
- ||     ||  || with no MME support ||
+ ||  lte-softmodem -Ooai.conf   || lte-softmodem -U Ooai.conf || with MME support (in oai.conf, MME parameter should be: active = "yes") ||
+ ||     ||  || with no MME support (in oai.conf, MME parameter should be: active = "no") ||