Changes between Version 1 and Version 2 of Tutorials/g0WmLTE/Tutorial3


Ignore:
Timestamp:
Nov 10, 2016, 6:42:34 PM (7 years ago)
Author:
msherman
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/g0WmLTE/Tutorial3

    v1 v2  
    44
    55=== Imaging ===
    6 The image used for this experiment is 'baseline.ndz'. In this tutorial we will use nodes equipped with Netgear AC341u LTE dongles. The basestation is Amarisoft running on Bsc03out.
     6The image used for this experiment is 'baseline.ndz'. In this tutorial we will use nodes equipped with Netgear AC341u LTE dongles. The basestation in use will depend on which one you have configured. The other tutorials specify which combinations are known to work well, as well as which nodes are close enough physically.
    77
    88During a normal experiment using OMF, the following actions are scripted and automated. This is a look at the steps involved in something as simple as starting an LTE connection behind the scenes.
    … …  
    1515 1. It will take roughly 60 seconds to come up.
    16161. {{{ ssh root@node7-1.grid.orbit-lab.org }}}
     171. repeat the above commands, replacing "node7-1" with the node name in question.
    1718
    1819=== Commands on the node ===
    … …  
    2021==== Loading the driver ====
    2122
    22 By Default Orbit nodes do not configure any wireless devices so the first thing, when manually configuring the device is to load the drivers; the following 2 lines will load the Sierra wireless Netgear LTE dongle:[[BR]]
     23By default ORBIT nodes do not enable any wireless devices. Therefore, the first thing when manually configuring the device is to load drivers; the following 2 lines will load the Sierra wireless Netgear LTE dongle:[[BR]]
    2324{{{
    2425modprobe GobiSerial