WiMAX Tutorial

This is a continuation of the ​WiMAX Tutorial and Primer.

Prerequisites

This tutorial series assumes you have an ​ORBIT account, have ​scheduled a session on the ORBIT test bed, are familiar with ​SSH'ing ​into the test bed itself, and are familiar with the basics of running ORBIT experiments. If you have not done these things yet, you may wish to do so before taking a look at this slightly more advanced experiment. If you are unfamiliar with or are entirely new to ORBIT, you may wish to start ​here.

Difficulty

This tutorial is of intermediate difficulty. In addition to the knowledge from the previous tutorial, basic fluency with the ​ORBIT Experiment Description Language (OEDL) and its source language, ​Ruby (and especially ​blocks within Ruby), are strongly recommended.

---

Background

This tutorial section is adapted from the tutorials at ​NYU-Polytech and expanded from the more concise ​ORBIT adaptations done previously. As before, we will perform our experiment on Sandbox 4, providing some background information at each step. For more information, see the relevant documentation for each step at one of the source websites.

---

Experiment: Check Connection Status, Then Send UDP Packets

---

The Code

The following are the links to experiment Description script and the underlying codes. In the interest of saving space, they are not posted directly to this page.

*[www.orbit-lab.org/attachment/wiki/WiMAX_Tutorial-2 ] *[www.orbit-lab.org/attachment/wiki/WiMAX_Tutorial-2 ] *[www.orbit-lab.org/attachment/wiki/WiMAX_Tutorial-2 ] *[www.orbit-lab.org/attachment/wiki/WiMAX_Tutorial-2 ]

At this point, we will give a primer on OMF and some of the functions inside the experiment. To skip to the experiment itself, click here.

---