= WiMAX Tutorial =

== Prerequisites == 

This tutorial series assumes you have an [http://www.orbit-lab.org/userManagement/register ORBIT account], have [https://www.orbit-lab.org/schedule/ scheduled a session] on the ORBIT test bed, are familiar with [http://en.wikipedia.org/wiki/Secure_Shell SSH]'ing [http://www.orbit-lab.org/wiki/Tutorial/HelloWorld#a4.RunningtheHelloWorldexperiment into the test bed itself, and are familiar with the basics of running ORBIT experiments]. If you have not done these things yet, you may wish to do so before taking a look at this slightly more advanced experiment. If you are unfamiliar with or are entirely new to ORBIT, you may wish to start [http://www.orbit-lab.org/ here].

== Getting Started ==

First, SSH into the test bed you plan on using for the experiment. For this experiment, we use ORBIT's Sandbox 4. 

[[Image(ssh.png)]]

=== About the Base Station ===

WiMAX (related to and derived from !WiFi) works by sending all data traffic through an [http://en.wikipedia.org/wiki/Wireless_access_point Access Point] called a Base Station. This is similar to how a cell phone connects to a cell tower. In fact, at one point WiMAX was used to provide mobile internet connectivity to cell phones! However, the WiMAX base station at WINLAB is special in that its operation settings can be changed to meet the needs of an experiment. This is good, because it permits tweaking of settings to conduct research. However, it also means that latest person to run experiments may have left the base station with settings that will make conducting experiments difficult. First, tell the base station to use default settings, and then reset it.

=== Interacting with the Base Station ===