==== GENI Configuration assembly ====
  [[TOC(Hardware, Hardware/hNodes/cNodeVer3*,depth=6)]]
Requires:
* Console ([wiki:Hardware/hNodes/cNodeVer3/aMain/cLV-67J LV-67J])
* 3 Nodes ([wiki:Hardware/hNodes/cNodeVer3/bMobile/cLV-67K LV-67K])

-- LV-67J --
Assemble as with G except: (put link to node specific page)
* 1 160GB HDD on tray, with standoffs (add picture)
* Power button in back panel
* No CM
* Intel 1000T NIC adapter

-- LV-67K --
Assemble as with G except:   (put link to node specific page)
* **DO NOT CONNECT 4 PIN ATX12V POWER CABLE
* Mobile node uses connector for 12V dc input, with 24 pin connector acting as output. Connecting both will damage board.
__
* Connect new CM, attach to back panel with angle bracket, #440 screws. Choose beveled or pan head appropriately.
* Use 60gb SSD on tray, with standoffs. (add picture)

===== Installing the base OS =====

====== Console Machine Disk Partitioning =====

While setting up Ubuntu server, partition the disk as follows:

* 20 GB Primary boot partition
* 20 GB Home directory
* 116 GB create a new mount point /Export for images 
* 4 GB Swap . Set the 'location' as end, and set 'use as' to swap area.
* 35 MB EFI boot partition 

===== Network setup and configuration =====
* Three networks
* Data
* CM
* Control
* 3 switches, 1 partitioned switch, or single cable out.


====== One unmanaged switch per subnet ======
[[Image(4Node_1.png, 600)]]
====== Single managed switch ======
[[Image(4Node_2.png, 600)]]
====== Single trunk per node ======
[[Image(4Node_3.png, 600)]]