Changes between Version 2 and Version 3 of Internal/Documentation/OpenFlow/switchReset

Timestamp:

Nov 26, 2012, 9:58:57 PM (11 years ago)

Author:

akoshibe

Comment:

—

Internal/Documentation/OpenFlow/switchReset

@@ -1 +1 @@
 = Factory resetting switches =
-This page describes how to factory reset various switches. 
+This page describes how to factory reset various switches, if not, at least the default credentials and serial line settings for working with the switch.  
 
 == Switchlist ==
@@ -8 +8 @@
  * [#g7224 GSM7224]
  * [#g7248 GSM7248]
+NEC
+ * [#ip8800 IP8800/S3640]
+Quanta
+ * [#lb9a LB9A]
 
 == References == 
@@ -44 +48 @@
  }}}
 
- Upon entering 8, the switch will reset and boot up. 
+ Upon entering 8, the switch will reset and boot up. You can check if the reset was successful by logging in with the default credentials.   
 {{{
 [Boot Menu] 8
@@ -161 +165 @@
  }}}
  
+=== IP8800/S3640 === #ip8800
+'''Default user/password:''' operator/blank [[BR]]
+'''Serial settings:''' carrier-watch off, 9600 baud, 8 data, 1 stop, parity none
+
+=== LB9A === #lb9a
+'''Default user/password:''' admin/pica8 (!XorPlus CLI), root/pica8 (system shell), root/openflow (!OpenFlow mode) [[BR]]
+'''Serial settings:''' carrier-watch off, 115200 baud, 8 data, 1 stop, parity none