Changes between Version 9 and Version 10 of Hardware/jCM

Timestamp:

Jan 11, 2013, 12:56:09 AM (11 years ago)

Author:

Ilya Chigirev

Comment:

—

Hardware/jCM

@@ -3 +3 @@
 [[TOC(Hardware, Hardware/cCM*, depth=3)]]
 
-The ORBIT Chassis Manager (CM) is a simple, reliable, platform-independent subsystem for managing and autonomously monitoring the status of each node in the ORBIT network testbed.  
+The ORBIT Chassis Manager (CM) is a simple, reliable, platform-independent subsystem for managing and autonomously monitoring the status of each node in the ORBIT network testbed. Currently there are 2 versions of the CM that are being used. The [wiki:Hardware/jCM/bCM1 CM1] is used to control the generation 1 nodes, and the [wiki:Hardware/jCM/dCM3 CM3] is being used to control the newer generation 3 nodes. [wiki:Hardware/jCM/cCM2 CM2] was designed for the generation 2 nodes, which are no longer being used. There are basic [wiki:Hardware/jCM/aRequirements requirements] of all the CMs must preform common through all the revisions, those some of the details change. 
 
 As shown in Figure 1, each ORBIT grid node consists of one Radio Node with two radio interfaces, two Ethernet interfaces for experiment control & data, and one Chassis Manager (CM) with a separate 
@@ -12 +12 @@
 
 
-