[[TOC(Hardware/CM/*, depth=2)]]

== Usage ==
=== Installing the CM3 ===
For installation instructions please see the node assembly wiki page, found [http://www.orbit-lab.org/wiki/Internal/Lv67cNode here]

=== UDP ===
The software loaded onto the CM3 provides 
=== HTTP Commands ===
All HTTP commands are can be executed by typing the IP of the device with the following command afterward
|| `/HardOff` || Turns device off if not already off, command to simulate button press ||
|| `/SoftOff` || Shuts down device by software, non-functional right now, same as !HardOff command ||
|| `/Reset` || Issues signal to reset pins on motherboard of host ||
|| `/PowerOn` || Turns device on if not already on ||

=== Physical Interface ===