Changes between Version 28 and Version 29 of Hardware/jCM/dCM3/cSoftware


Ignore:
Timestamp:
May 29, 2013, 12:07:50 AM (11 years ago)
Author:
msherman
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3/cSoftware

    v28 v29  
    4646Re-flashing as CM over the serial port should be done when the node is not accessible aver the network, it is a generally slower method than via FTP. Before you can recover the firmware over serial you will need to install Device Installer on your PC. Device Installer is free to download off the lantronix website, and can be found [http://ltxfaq.custhelp.com/app/answers/detail/a_id/644 here]. For this process to work correctly a straight (non-crossover) serial cable must be used.
    4747
     48Plug in serial cable, follow directions, apply power cable at end
     49
    4850 1. Open {{{DeviceInstaller}}}
    4951 2. Go to 'Tools'->'Advanced'->'Recover Firmware' (or simply the F8 key)