Changes between Version 9 and Version 10 of Hardware/hNodes/cNodeVer5

Timestamp:

Feb 14, 2017, 7:51:34 PM (7 years ago)

Author:

jkol

Comment:

—

Hardware/hNodes/cNodeVer5

@@ -35 +35 @@
 
 Parts:
-* 1x 3D printed case extension
-* 8x M2.5 x 0.45mm thread, 20mm long male-female standoff
-* 4x M2.5 x 0.45mm thread, 12mm long round-head screw
-* 3x 6" right-angle SMA male to regular SMA female cable
-* 1x 6" SuperSpeed USB 3.0 A Male to Micro B Male Cable
-* connectors & cabling to connect CM3 to NUC motherboard
-  * 6" "floppy power" to TE Connectivity (for standby power)
-  * 6" 2x2 Molex C-grid 100mil
+  * 1x 3D printed case extension
+  * 8x M2.5 x 0.45mm thread, 20mm long male-female standoff
+  * 4x M2.5 x 0.45mm thread, 12mm long round-head screw
+  * 3x 6" right-angle SMA male to regular SMA female cable
+  * 1x 6" !SuperSpeed USB 3.0 A Male to Micro B Male Cable
+  * connectors & cabling to connect CM3 to NUC motherboard
+    * 6" cable with "floppy power" connector and Molex 22-55-2041 to Samtec TCSD-05-01-N (power on sense and on/off/reset control)
+    * 6" cable with TE Connectivity 179228-2 to TE Connectivity 440146-4 (for standby power)
+
+Standby Power Cable Assembly:
+  ||= TE Connectivity 440146-4 =||= Description =||= TE Connectivity 179228-2 =||
+  || 1 || +5V Standby || 1 ||
+  || 2 || Ground || 2 ||
+  || 3 ||  ||  ||
+  || 4 ||  ||  ||
+  Standby power is sourced from the NUC6i5SYK's "AUX_PWR" header next to the SSD. Other NUC's may have this header located elsewhere.
+
+Power Sense and !On/Off/Reset Control Cable Assembly:
+  ||= Samtec TCSD-05-01-N =||= Description =||= "Floppy Power" Connector =||= Molex 22-55-2041 =||
+  ||= 1 ||  ||  ||  ||
+  ||= 2 ||  ||  ||  ||
+  ||= 3 ||  ||  ||  ||
+  ||= 4 ||  ||  ||  ||
+  ||= 5 ||= Ground ||  ||= 2, 4 ||
+  ||= 6 ||= Power Switch ||  ||= 1 ||
+  ||= 7 ||= Reset Switch ||  ||= 3  ||
+  ||= 8 ||= Ground ||= 2 ||  ||
+  ||= 9 ||= +5V (sense)||= 1 ||  ||
+  ||= 10 ||  ||  ||  ||
+  The NUC6i5SYK's front panel header is located on the "back side" of the board (opposite side of where the SSD is installed). Other NUC's may have this header located elsewhere.
+
 Internal wiring
+
+
+
 [[Image(InternalConnections.png)]]