====== LV-67K Specifics ======



'''Bios Flashing Instructions'''[[BR]]

[[CollapsibleStart(Make A USB Flash disk.)]][[Include(Hardware/hNodes/cNodeVer3/dAssembly/cBios/USBBoot)]][[CollapsibleEnd]]
----


======= Bios Setup =======
* Go to tab Exit
 * Load Default settings
 * Then enable the following options
* Main
 * Boot Features
  * enable quickboot
  * enable console redirection
   * ensure rate is 115200
* Advanced
 * network config
  * enable lan oprom
* Others
 * hardware monitor
  * warning temp = 80c
  * enable cpu fan temp control
   * temp = 40c
   * threshold = 5c
* Boot (use + and - to move items, arrow keys to navigate. shift+1 toggles enabled state)
 1. usb hdd
 2. pci LAN (will not show both NICs until reboot after lan oprom enabled)
 3. HDD0
 4. internal shell (if first boots fail, has options to retry, go into bios, etc.)
 5. move all others below these, and disable with shift+1

======= Troubleshooting =======
* Step 1 is to reset bios to default settings and reset options as above.
* If this fails, remove power from the motherboard, move the cmos jumper to position 2, wait at least 30 seconds, and then move it back. Then reset bios options as above.
 * Jumper: JRTC
 * Type: Onboard 3-pin jumper

  || JRTC || Mode ||
  || 1-2 || Clear CMOS ||
  || 2-3 || Normal Operation ||
  || Default setting: || 2-3 ||

[[Image(jrtc.png)]]

* If bios is corrupted, reflash according to directions at [http://www.commell.com.tw/Support/Product%20Technical%20Support/LV-67K.htm]
* When flashing bios, be sure to use -savemac option.
* If mac is lost, MACtool below can be used.

urls used 

[http://www.asrock.com/support/Download/MacTool.asp]

[http://www.paoloiannelli.com/tag/flashdisable/]