Changes between Version 4 and Version 5 of Hardware/hNodes/cNodeVer3/dAssembly/aCase

Timestamp:

Oct 18, 2013, 4:50:12 PM (11 years ago)

Author:

msherman

Comment:

—

Hardware/hNodes/cNodeVer3/dAssembly/aCase

@@ -16 +16 @@
 ====== Case Construction ======
 //'''These instructions are the generic instructions for all nodes. Please check each individual motherboard page for specific instructions relating to that motherboard model'''//[[BR]][[BR]]
+
 ====== Components ======
 [[Image(ComponentList.jpg, 300, align=center)]] [[BR]]
+ || '''System''' ||  || 
+ || 1 || !#0 Screwdriver || 
+ || 1 || !#2 Screwdriver || 
+ || 1 || Vice Grips || 
+ || 1 || 3/16 Socket || 
  || '''System''' ||  ||
  || 1 || LV-67J mother board || 
@@ -45 +51 @@
 [[BR]]
 [[BR]]
+
 ====== Assembly Order ======
 
@@ -68 +75 @@
   2. Screw in (1) 6-32 1/4" pan head screw in top hole
   3. Screw in (2) 6-32 1/4" 100 degree screws
-  4. If desktop node (not mobile) attach 4 pin mobo power
-  5.
+  4. Slide (1) velcro tie into slot nearest motherboard from bottom, hook side facing away from motherboard
+  5. If desktop node (not mobile) attach 4 pin mobo power
+  6. Attach 24 pin cable to motherboard, making sure it seats properly.
+  7. Fold down excess cable from 24 pin.
+  8. Plug furthest SATA connector into SSD, folding the rest neatly
+  9. Plug (1) molex to floppy adapter into molex connector nearest power supply.
+  10. Leave other molex loose, but fold excess cable.