Changes between Version 2 and Version 3 of Hardware/hNodes/cNodeVer3/dAssembly/aCase

Timestamp:

Oct 18, 2013, 4:37:53 PM (11 years ago)

Author:

msherman

Comment:

—

Hardware/hNodes/cNodeVer3/dAssembly/aCase

@@ -2 +2 @@
 [[TOC(Hardware,Hardware/hNodes*, depth=6)]]
 ''' Bench Test '''
- 1. Place unpacked motherboard on bench and connect power supply, monitor, and USB keyboard
+ 1. Place unpacked motherboard on anti-static mat on bench, and connect power supply, monitor, and USB keyboard
  2. Connect hard drive to motherboard and power supply
  3. insert USB key for BIOS flashing and follow instructions as from specific motherboard page for BIOS flashing instruction
  4. Double check the following
+  * link to J bios settings
+  * link to K bios settings
+  * Virtualization turned on
   * No hauls on keyboard errors
   * Serial redirection (115200/8/N/1)
@@ -16 +19 @@
 [[Image(ComponentList.jpg, 300, align=center)]] [[BR]]
  || '''System''' ||  ||
- || 1 || LV-67C mother board || 
- || 1 || 270 Watt power supply (''Part Number FSP270-60LE'') || 
- || 1 || SATA Hard drive || 
+ || 1 || LV-67J mother board || 
+ || 1 || 300 Watt power supply (''Part Number FSP300-60LG'') || 
+ || 1 || SATA SSD || 
  || 1 || CM3 || 
- || 3 || Required cables for CM3 || 
- || 1 || SATA cable || 
+ || 2 || 2 pin cables for CM3 || 
+ || 1 || twisted vampire cable for CM3 || 
+ || 2 || vampire clips for CM3 ||
+ || 1 || Short, locking SATA cable || 
+ || 1 || molex to floppy adapter || 
  || 1 || serial cable (''from cm3 to motherboard'') || 
  || '''Case''' ||  || 
- || 1 || case Chassis ''(U shaped chassis)'' || 
- || 1 || rear face plate cap ''(Folds over the U)'' || 
- || 1 || front face plate ''(has cm3 punch outs, and hard dive mount holes)'' || 
+ || 1 || case bottom ''(U shaped chassis)'' || 
  || 1 || top cover ''(has Circular CPU ventilation holes)'' || 
  || 1 || motherboard face plate ''(supplied with the motherboard)'' || 
  || 1 || Velcro wire strap || 
  || '''Fasteners''' ||  || 
- || 4 || 6-32 1/2" 100 degree screws (''securing the motherboard'') ||
- || 12 || 6-32 1/4" 100 degree screws (''fastening the case together and [[BR]] securing the power supply to the case'') || 
+ || 4 || 6-32 1/2" pan head screws (''securing the motherboard'') ||
+ || 10 || 6-32 1/4" 100 degree screws (''fastening the case together and [[BR]] securing the power supply to the case'') || 
  || 1 || 6-32 1/4" pan head screw (''fastening the power supply'') || 
- || 3 || 6-32 3/16" 100 degree screws (''CM mounting to chassis'') || 
- || 3 || 6-32 9/32" hex stand offs (''CM mounting'') || 
- || 3 || 6-32 3/16" pan head screws (''CM mounting'') || 
- || 4 || M3 5mm stand offs (''hard drive mounting'') || 
- || 4 || M3 5mm screws (''hard drive mounting'') || 
+ || 2 || CM 100 degree screws (''CM mounting to chassis'') || 
+ || 2 || CM pan head screws (''CM mounting'') || 
+ || 2 || right angle brackets (''CM mounting'') ||
+ || 4 || M3 5mm stand offs (''SSD mounting'') || 
+ || 4 || M3 5mm screws (''SSD mounting'') || 
 [[BR]]
 [[BR]]
-====== Main U chassis ======
+====== Assembly Order ======
+
+ 1. Serial Cable
+  1. Place in slot in front of case with cable inside and head outside
+  2. Orient so that it will correctly plug into motherboard
+ 2. a
+ 3. a
+ 4. a
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+---------------------
  1. Install the wireless cards onto the motherboard first as it may be difficult to reach once the motherboard is in the case.
   * Make sure to install any pigtails at this time as well