wiki:Hardware/fDevices/cSDR/hNutaq

Version 18 (modified by msherman, 9 years ago) ( diff )

Nutaq ZeptoSDR

ORBIT has 2 ZeptoSDR.

  • They are attached to a Gen4 Node as the host machine via gigabit ethernet.
  • In addition, they are powered by the host nodes, for remote on/off capability.
  • The ZeptoSDR has a Zedboard FPGA, and Nutaq's RADIO420X board.
  • It is tunable from 300MHz to 3.8GHz, with bandwidth between 1.5 and 28 MHz.

Nutaq PicoSDR

ORBIT has 2 PicoSDR2x2-E.

  • Each is an independent ORBIT node, due to its embedded SAMC-514 computer, with an Intel Core i7 CPU running at 2.1 GHz.
  • Each has a Perseus 601x FPGA, and a Radio420M FMC stack.
  • They are integrated with the orbit experiment control infrastructure, as nodes 12-1 and 20-1. A Raspberry Pi is running the CMC management service, using telnet to control the PicoSDR's backplane.

Attachments (5)

Note: See TracWiki for help on using the wiki.