Changes between Version 19 and Version 20 of Hardware/bDomains/cSandboxes/dSB4

Timestamp:

Mar 2, 2012, 5:40:30 PM (12 years ago)

Author:

nilanjan

Comment:

—

Hardware/bDomains/cSandboxes/dSB4

@@ -9 +9 @@
 == RF Matrix Control Services ==
 
-This service controls the RF attenuator matrix. Since there are a total of nine (9) input/output ports on the attenuator matrix, the first 8 input/output ports are connected to nodes 1 thru 8, respectively. The 9th input/output port is connect to the Wimax base station (BS). So in a nutshell
+This service controls the RF attenuator matrix. Since there are a total of nine (9) input/output ports on the attenuator matrix, the first 8 input/output ports are connected to nodes 1 thru 8, respectively. The 9th input/output port is connect to the Wimax base station (BS).
  || RF Matrix Port || Attached device || Additional attenuation values (dB) ||
- || 1 || node1-1 || * ||
- || 2 || node1-2 || * ||
- || 3 || node1-3 || * ||
- || 4 || node1-4 || * ||
- || 5 || node1-5 || * ||
- || 6 || node1-6 || * ||
- || 7 || node1-7 || * ||
- || 8 || node1-8 || * ||
+ || 1 || node1-1 || 20* ||
+ || 2 || node1-2 || 20* ||
+ || 3 || node1-3 || 25 ||
+ || 4 || node1-4 || 30 ||
+ || 5 || node1-5 || 20* ||
+ || 6 || node1-6 || 20* ||
+ || 7 || node1-7 || 10* ||
+ || 8 || node1-8 || 0* ||
  || 9 || wimax BS || * ||
 
-Attenuation values between the eight (8) nodes and the BS can be controlled individually with the following URL commands listed below.
+Attenuation values between each RF attenuator port (ie. the eight (8) nodes and wimax BS) can be controlled individually with the following URL commands listed below.
 
 1. set - to set attenuation value on given port pairs (example portA=1 , portB=2, attenuation = 20)[[BR]]