[orbit-user] Unable to run AODV

[Max Ott]

Your problem is that you are using a program which has been OMLified
(enabled to send measurements to the Orbit Measurement System). In
order to run that, you need to also supply a configuration script.
There should be a default one, but I'm not sure how that looks right
now.

We are in the process of switching to a new implementation of the
measurement system, but I wasn't even aware that this program was part
of it as nobody replied to an earlier request to let us know :(

Having said that, we recently populated a an inventory database which
should make the process of setting up AODV experiments much simpler.
I'll check on the progress status of that later.

Thanks,

-max


On Sat, Mar 1, 2008 at 4:06 AM, Rahul Agarwal <rahul.ju at gmail.com> wrote:
> Hi all,
> We were trying to run aodv using aodvd command( not by scripts) as shown in
> Documentation section
> (http://www.orbit-lab.org/wiki/HowTo/UsingAODV/AODVonORBIT).
>  As instructed we imaged the nodes of sb2 with adhoc_0.1.ndz. Then we found
> the mac address of interface ath0 and echoed it to the file
> /proc/net/mackill in respective nodes.But nothing appeared in the file .
> After repeated attempts , we were unable to modify /proc/net/mackill.
>  Also , on running aodvd command (aodvd -l -r 100) , the error shown was -
>
> ERROR(oml) Could not get either OML_NAME or OML_CONFIG from env
> 11:03:42.670 host_init: Could not get index ofëð·]û¿
> : No such device
>  11:03:42.670 cleanup: CLEANING UP!
> --
> We were unable to make out of the error.
>
> We r in a fix as we tried 3 to 4 times on both sb1 and sb2 (using both aodvd
> command and corresponding ruby scripts) but could not perform the
> experiment.
> Somebody please tell us , what's going wrong and how can we run the aodv
> experiment flawlessly.
> We are genuinely in need of help.
>
> Thanks a lot,
> Rahul Agarwal & Ujjwal Jain
> Jadavpur University,
> Kolkata
> INDIA
>
> _______________________________________________
>  orbit-user mailing list
>  orbit-user at orbit-lab.org
>  http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>
>



-- 
Dr. Max Ott
Research Program Leader - Network and Pervasive Computing, NICTA Australia
Founder & CTO, Semandex Networks
Research Professor, WINLAB, Rutgers University
Senior Visiting Fellow, School of EE&T, UNSW