[orbit-user] Sandbox 5 problem imaging gnuradio

[Fehmi Ben Abdesslem]

Hi Naveen,

To sum up, do the following:
orbit load all gnuradio.ndz  (to image all nodes)
orbit tell on all (to switch on all nodes)
ssh root at node1-1 (wait a minute beforehand)

"No route to host" appears when nodes are off. To check nodes'states:
orbit stat all

Hope this helps,
Fehmi


SANTHAPURI, NAVEEN KUMAR a écrit :
> Hi Haris,
>
>    Thanks for the reply. Sorry,  I must have made myself clear. I am following the steps at this link: http://www.orbit-lab.org/wiki/Documentation/GNURadio
>
> To load the nodes with the right image:
>
>     * Step 1: Login to the console.
>
>                 ssh username@ console.sb5.orbit-lab.org
>
>     * Step 2: Image the nodes.
>
>                 imageNodes [[1,1],[1,2]] gnuradio.ndz
>
>                 Other images are: baseline-2.1.ndz (for building from scratch, supported)
>                                   gnuradio_visual.ndz (for visual outputs, unsupported)
>
>     * Step 3: Power up node1-1 and node1-2.
>
>                 wget -O - -q 'http://cmc:5012/cmc/on?x=1&y=1'
>                 wget -O - -q 'http://cmc:5012/cmc/on?x=1&y=2'
>
>     * Step 4: Log into the node.
>
>                 ssh root at node1-1
>                 ssh root at node1-2
>
>
> Yes, as you said the output says 2 nodes imaged after step 2. I proceeded with step 3 and when I try to ssh (step 4) it says no route can be found to host.
>
>
> regards,
> Naveen
>
> ==============================================
>
> _______________________________________________
> orbit-user mailing list
> orbit-user at orbit-lab.org
> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>
>