[orbit-user] Sandbox 5 problem imaging gnuradio

[Haris Kremo]

I see that the nodes are turned on

http://www.orbit-lab.org/wiki/Status

I had to clean up the entry in .ssh/known_hosts since the key changed
but it works for me:

harisk at console:~$ ssh root at node1-1
The authenticity of host 'node1-1 (10.15.1.1)' can't be established.
RSA key fingerprint is aa:be:32:7f:8f:03:c7:70:91:6d:d8:5c:69:57:4b:6c.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node1-1,10.15.1.1' (RSA) to the list of known hosts.
Last login: Wed Jul  2 16:21:44 2008 from consolec.sb5.orbit-lab.org
Linux (none) 2.6.18 #2 PREEMPT Wed Oct 11 18:55:31 EDT 2006 i686
node1-1:~#

I takes a while to boot up the node and during that period there is
"no route to host"

On 7/2/08, SANTHAPURI, NAVEEN KUMAR <SANTHAPU at engr.sc.edu> wrote:
> Hi Haris,
>
>    Thanks for the reply. Sorry,  I must have made myself clear. I am following the steps at this link: http://www.orbit-lab.org/wiki/Documentation/GNURadio
>
>  To load the nodes with the right image:
>
>     * Step 1: Login to the console.
>
>                 ssh username@ console.sb5.orbit-lab.org
>
>     * Step 2: Image the nodes.
>
>                 imageNodes [[1,1],[1,2]] gnuradio.ndz
>
>                 Other images are: baseline-2.1.ndz (for building from scratch, supported)
>                                   gnuradio_visual.ndz (for visual outputs, unsupported)
>
>     * Step 3: Power up node1-1 and node1-2.
>
>                 wget -O - -q 'http://cmc:5012/cmc/on?x=1&y=1'
>                 wget -O - -q 'http://cmc:5012/cmc/on?x=1&y=2'
>
>     * Step 4: Log into the node.
>
>                 ssh root at node1-1
>                 ssh root at node1-2
>
>
>  Yes, as you said the output says 2 nodes imaged after step 2. I proceeded with step 3 and when I try to ssh (step 4) it says no route can be found to host.
>
>
>  regards,
>  Naveen
>
>  ==============================================
>
>  _______________________________________________
>  orbit-user mailing list
>  orbit-user at orbit-lab.org
>  http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>