No subject

Yukon PXE v3.06  (20041109)
(C)Copyright 2003-2004 Marvell(R). All rights reserved.

Pre-boot eXecution Environment (PXE) v2.1
(C)Copyright 1997-2000 Intel Corporation.

CLIENT MAC ADDR: 00 0F EA 84 C7 E5  
GUID: 30303046-4541-3834-4337-4535FFFFFFFF
CLIENT IP: 10.10.1.4  MASK: 255.255.0.0  DHCP IP: 10.10.0.7

GATEWAY IP: 10.10.0.1 
PXE-E32: TFTP open timeout

TFTP...          

Thanks,
Sanjit




-----Original Message-----
From: orbit-user-bounces at orbit-lab.org
[mailto:orbit-user-bounces at orbit-lab.org] On Behalf Of Yu Zhang
Sent: Thursday, February 07, 2008 10:03 AM
To: Orbit user discussion mailing list
Subject: Re: [orbit-user] Grid Nodes' Imaging times out

Hi,

I think it is very common in orbits. Try to image again. If you need
five nodes, image ten nodes, then chances that you can bring five out
of ten up.

Best,

Yu

On Feb 7, 2008 9:58 AM, Sanjit Krishnan Kaul <sanjitkaul at gmail.com> wrote:
>
>
>
>
> Experiment: grid_2008_02_07_09_32_22
>
> The nodes don't seem to switch on.
>
> I have restarted the imaging process but there doesn't seem any hope of
the
> nodes starting. Also, the nodes I am using worked just fine yesterday
> evening.
>
>
>
> Thanks,
>
> Sanjit
>
>
> _______________________________________________
> orbit-user mailing list
> orbit-user at orbit-lab.org
> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>
>
_______________________________________________
orbit-user mailing list
orbit-user at orbit-lab.org
http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user