[orbit-user] Problem with imaging outdoor grid nodes?

[Mesut Ali Ergin]

Suhas,

I've fixed one thing related to imaging bandwidth this afternoon after
Sanjit let me know about imaging problems. If your imaging experience
was from before or around  3pm today, then I would suggest another
try. So far as not being able to reach a node after successfull
imaging is concerned, it is not usual. Try with the latest baseline
image and report if you could reproduce the problem.

Best,

--
MAE



On 1/30/08, suhas mathur <suhas at winlab.rutgers.edu> wrote:
> Hi all-
>
> I am a new user on ORBIT and I have been having problems with imaging
> of nodes on the outdoor grid. Sometimes, the nodes timeout and
> sometime they fail. Sometimes, some of them time out and others fail.
> Has anyone else experienced similar problems on the outdoor nodes or
> am I missing something? I have gotten things to work at least once
> without any problems.
>
> The image I am using is baseline-2.3.ndz
>
> The imaging command I am using is "omf load
> [[1,1],[1,2],[1,3],[1,4],[1,5],[1,6],[1,7],[1,8],[1,9],[1,10]]
> baseline-2.3.ndz"
>
> The command I am using to turn them on is "omf tell on all"
>
> Also, sometimes after 'supposedly successful imaging", I can ping the
> nodes but I cannot ssh to them - the error I get is: "no path to host
> node1-x'.
>
> Finally, is there a way to tell, from the verbose output of the
> imaging process, which node(s) have been imaged so one can begin
> working with them while others continue to get imaged?
>
> Thanks,
> Suhas
> _______________________________________________
> orbit-user mailing list
> orbit-user at orbit-lab.org
> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>


-- 
Mesut Ali Ergin
ergin at winlab.rutgers.edu

Rutgers University, WINLAB,
Technology Centre of New Jersey,
671 Rt. 1 South, North Brunswick,
New Jersey, 08902-3390, USA

Phone: 862-368-6620
Fax:   732-932-6882