[orbit-user] Unable to run AODV

[Gautam D. Bhanage]

I can try and help with the Mackill part.  Can you please put in the exact
commands
you used to configure the card and setup of MAC filtering since all the logs
on the nodes
are lost after imaging.

Thanks,
Gautam



On 2/29/08, Rahul Agarwal <rahul.ju at gmail.com> wrote:
>
> Hi all,
> We were trying to run aodv using aodvd command( not by scripts) as shown
> in Documentation section (
> http://www.orbit-lab.org/wiki/HowTo/UsingAODV/AODVonORBIT).
> As instructed we imaged the nodes of sb2 with adhoc_0.1.ndz. Then we found
> the mac address of interface ath0 and echoed it to the file
> /proc/net/mackill in respective nodes.But nothing appeared in the file .
> After repeated attempts , we were unable to modify /proc/net/mackill.
> Also , on running aodvd command (aodvd -l -r 100) , the error shown was -
>
> ERROR(oml) Could not get either OML_NAME or OML_CONFIG from env
> 11:03:42.670 host_init: Could not get index ofëð·]û¿
> : No such device
> 11:03:42.670 cleanup: CLEANING UP!
> --
> We were unable to make out of the error.
>
> We r in a fix as we tried 3 to 4 times on both sb1 and sb2 (using both
> aodvd command and corresponding ruby scripts) but could not perform the
> experiment.
> Somebody please tell us , what's going wrong and how can we run the aodv
> experiment flawlessly.
> We are genuinely in need of help.
>
> Thanks a lot,
> Rahul Agarwal & Ujjwal Jain
> Jadavpur University,
> Kolkata
> INDIA
>
> _______________________________________________
> orbit-user mailing list
> orbit-user at orbit-lab.org
> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>
>


-- 
--
Wireless Information Networking Lab
Rutgers, The State University of New Jersey
Technology Centre of New Jersey
671 Route 1 South
North Brunswick,
N.J . 08902-3390.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://orbit-lab.org/pipermail/orbit-user/attachments/20080229/7b84c9bd/attachment.htm