ORBIT-USER: Cannot ssh to node

Sat May 5 04:31:01 EDT 2007

No, you are fine but it seems that the chassis manager on node 1-1 is
in an inconsistent state (at best).

FATAL run: ServiceException: ServiceException
       Node (1,1) Not Registered for Testbed: '#<CMC::Testbed:0xb7ac3f3c>'

Having in mind the hour and the fact that there is nobody close to the
nodes I suggest trying some other sandbox.

On 5/5/07, David Murray <D.Murray at murdoch.edu.au> wrote:
> Apologies for all of the questions but I am still struggling.
>
> I try to power on the nodes and I get the following output:
>
> Roy_M at console.sb1:~$ wget -O - "http://cmc:5012/cmc/nodeSetOn?nodes=[1,1..2]"
> --04:18:49--  http://cmc:5012/cmc/nodeSetOn?nodes=[1,1..2]
>            => `-'
> Resolving cmc... 10.0.0.11
> Connecting to cmc|10.0.0.11|:5012... connected.
> HTTP request sent, awaiting response... 200 OK
> Length: 0
>
>     [ <=>                                 ] 0             --.--K/s
>
> 04:18:49 (0.00 B/s) - `-' saved [0/0]
>
>
>
> I try to image the nodes and I get:
>
>
>
> Roy_M at console.sb1:~$ imageNodes 1,1..2 baseline.ndz
> Imaging nodes: 1,1..2 with image baseline.ndz
> Using config /etc/nodehandler/grid.cfg
> /etc/nodehandler/grid.cfg:20: warning: Insecure world writable dir /tmp, mode 041777
> Using logfile /etc/nodehandler/nodehandler_log.xml
>  INFO init: NodeHandler Version 3.6.4-1 (849)
>  INFO init: Experiment ID: sb1_2007_05_05_04_20_03
>  INFO Experiment: load system:exp:stdlib
>  INFO prop.resetDelay: resetDelay = 180:Fixnum
>  INFO Experiment: load system:exp:imageNode
>  INFO prop.nodes: nodes = [1, 1..2]:Array
>  INFO prop.image: image = "baseline.ndz":String
> /tmp/eee.100/lib/util/communication.rb:127: warning: Insecure world writable dir /tmp, mode 041777
> FATAL run: ServiceException: ServiceException
>         Node (1,1) Not Registered for Testbed: '#<CMC::Testbed:0xb7ac3f3c>'
>  INFO run: Experiment sb1_2007_05_05_04_20_03 finished after 0:1
>  done.
> Roy_M at console.sb1:~$
>
> Am I doing something wrong?
>
> Thanks
>
> David
>
>
>
>
> -----Original Message-----
> From:   owner-orbit-user at winlab.rutgers.edu on behalf of Haris Kremo
> Sent:   Fri 5/4/2007 4:24 PM
> To:     orbit-user at winlab.rutgers.edu
> Cc:
> Subject:        Re: ORBIT-USER: Cannot ssh to node
>
> The nodes turn off after imaging. To turn both of them on use:
>
> wget -O - "http://cmc:5012/cmc/nodeSetOn?nodes=[1,1..2]"
>
> http://www.orbit-lab.org/wiki/FAQ#can-i-reboot-or-power-cycle-my-nodes
>
> Once when the node turns on you can monitor booting using telnet on
> the serial console:
>
> http://www.orbit-lab.org/wiki/FAQ#do-my-nodes-have-consoles-i-can-look-at
>
> On 5/4/07, David Murray <D.Murray at murdoch.edu.au> wrote:
> >
> >
> >
> > Hi
> >
> >  Was just using sandbox 1 and after imaging the nodes with the default image
> > i was unable to ssh to them. Am I doing something wrong? Below is the output
> > of my imaging and my attempted ssh.
> >
> >  Thanks for your time
> >
> >  David
> >
> >  Roy_M at console.sb1:~$ imageNodes [1,2] baseline.ndz
> >  Imaging nodes: [1,2] with image baseline.ndz
> >  Using config /etc/nodehandler/grid.cfg
> >  /etc/nodehandler/grid.cfg:20: warning: Insecure world writable dir /tmp,
> > mode 041777
> >  Using logfile /etc/nodehandler/nodehandler_log.xml
> >   INFO init: NodeHandler Version 3.6.4-1 (849)
> >   INFO init: Experiment ID: sb1_2007_05_04_03_54_43
> >   INFO Experiment: load system:exp:stdlib
> >   INFO prop.resetDelay: resetDelay = 180:Fixnum
> >   INFO Experiment: load system:exp:imageNode
> >   INFO prop.nodes: nodes = [[1, 2]]:Array
> >   INFO prop.image: image = "baseline.ndz":String
> >  /tmp/eee.547/lib/util/communication.rb:127: warning:
> > Insecure world writable dir /tmp, mode 041777
> >   INFO stdlib: 1 out of 1 node(s) still down n_1_2
> >   INFO stdlib: 1 out of 1 node(s) still down n_1_2
> >   INFO stdlib: 1 out of 1 node(s) still down n_1_2
> >   INFO stdlib: 1 out of 1 node(s) still down n_1_2
> >   INFO stdlib: 1 out of 1 node(s) still down n_1_2
> >   INFO stdlib: 1 out of 1 node(s) still down n_1_2
> >   INFO n_1_2: Checked in as /ip/10.11.1.2 booting off pxe:1.1.4
> >   INFO exp: Progress(1/1): 0/0/0 min(n_1_2)/avg/max (69.590012)
> >   INFO whenAll: _ALL_: 'status[text()='UP']' fires
> >   INFO exp: Progress(1/1): 0/0/0 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 0/0/0 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 0/0/0 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 0/0/0 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 0/0/0 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 0/0/0 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 10/10/10 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 10/10/10 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 10/10/10 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 20/20/20 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 20/20/20 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 30/30/30 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 30/30/30 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 30/30/30 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 40/40/40 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 40/40/40 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 50/50/50 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 50/50/50 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 60/60/60 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 60/60/60 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 60/60/60 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 70/70/70 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 70/70/70 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 70/70/70 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 80/80/80 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 90/90/90 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 90/90/90 min(n_1_2)/avg/max (69.590012)
> >   INFO exp: Progress(1/1): 90/90/90 min(n_1_2)/avg/max (69.590012)
> >  ERROR comm: While processing command '/r_1/c_2 13 APP_EVENT STDOUT
> > builtin:load_image' Error: 'undefined method `match' for nil:NilClass'
> >   INFO exp: Progress(1/1): 90/90/90 min(n_1_2)/avg/max (69.590012)
> >   INFO whenAll: image: 'apps/builtin/status[text()='DONE.OK']' fires
> >   INFO Experiment: DONE!
> >   INFO run: Experiment sb1_2007_05_04_03_54_43 finished after 6:8
> >   done.
> >  Roy_M at console.sb1:~$ ssh root at node1-2
> >  ssh: connect to host node1-2 port 22: No route to host
> >  Roy_M at console.sb1:~$ ssh root at node1-1
> >  ssh: connect to host node1-1 port 22: No route to host
> >
> >
>
>
>
>
>