ORBIT-USER: help on using madwifi

[Luis R. Rodriguez]

I'd love to answer this but unfortunately I am not involved with this
ruby development model. I am in hopes some other team member that is
will reply to address your concerns.

  Luis

On 1/30/07, Arinto Murdopo <arinto at gmail.com> wrote:
> Hi all, I also have one question related to Bin Zan's question. How about
> including iwpriv command into .rb script file ( so I can automate the
> Virtual Mobility experiment using .rb script) ?
>
> Regards ,
>
> Arinto
>
>
> On 1/31/07, Bin Zan <zanb at eden.rutgers.edu> wrote:
> > Hi all,
> >              Is it possible to include "wlanconfig" command into .rb
> script file ( so I can create virtual access points through .rb script) ? I
> noticed "node.net.w0" is for "iwconfig" command.
> >
> > Thanks,
> > Bin Zan
> >
> > -----Original Message-----
> > From: owner-orbit-user at winlab.rutgers.edu
> > [mailto: owner-orbit-user at winlab.rutgers.edu]On Behalf Of
> Bin Zan
> > Sent: 2007年1月30日 14:55
> > To: orbit-user at winlab.rutgers.edu
> > Subject: RE: ORBIT-USER: help on using madwifi
> >
> >
> > Yes, that works.  Really appreciated.
> >
> > Bin Zan
> >
> >
> >
> > -----Original Message-----
> > From: owner-orbit-user at winlab.rutgers.edu
> > [mailto: owner-orbit-user at winlab.rutgers.edu]On Behalf Of
> Luis R.
> > Rodriguez
> > Sent: 2007年1月30日 14:43
> > To: orbit-user at winlab.rutgers.edu
> > Subject: Re: ORBIT-USER: help on using madwifi
> >
> >
> > On 1/30/07, Bin Zan <zanb at eden.rutgers.edu> wrote:
> > > Hi all,
> > >               I use the latest image baseline-2.0.ndz and after image, I
> log
> > > on to single node try to run "wlanconfig ath0 create wlandev wifi0
> wlanmode
> > > ap" in order to create an interface as an access point followed
> > > http://madwifi.org/wiki/UserDocs/AccessPointInterface ,
> but it
> > > gave me "wlanconfig: ioctl: Input/output error", does any one the what
> is
> > > wrong?
> >
> > Since the driver loads and depending on the sandbox node you are on
> > you will already get some few ath# interfaces created. If ath0 is
> > already there then you will get an error when trying to create it.
> > What I'd suggest is to try:
> >
> > wlanconfig ath2 destroy
> > wlanconfig ath2 create wlandev wifi0 wlanmode ap
> >
> >   Luis
> >
> >
> >
> >
> >
>
>