ORBIT-USER: AP question

[Sachin Ganu]

Sure.. The prototype is completely optional.. You can use the nodehandler
script to just initialize the wireless interfaces and let the driver/fw
handle the AP functionality

Just skip the node.prototype { } part from the script

On 1/8/07, Andrea G Forte <andreaf at cs.columbia.edu> wrote:
>
> I have one question about how the APs work in the test-bed.
> I have seen many examples in the wiki where the AP sends and receives
> packets using the prototype "sender" and/or "receiver". Do I have to
> define a prototype for the AP if I want station A to send packet to
> station B using that AP? Is it possible to just specify mode (Master),
> channel and network  (802.11b), without anything else and have the AP
> work as a normal AP (relay packets between stations)?
>
> Thanks a lot,
> -Andrea
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://orbit-lab.org/pipermail/orbit-user/attachments/20070108/7452beae/attachment.htm