ORBIT-USER: Logging in

[Ivan Seskar]

Pleas try again.

Ivan. 

-----Original Message-----
From: owner-orbit-user at winlab.rutgers.edu
[mailto:owner-orbit-user at winlab.rutgers.edu] On Behalf Of Arinto Murdopo
Sent: Wednesday, January 03, 2007 6:41 PM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Logging in

I tried on SB 7 and still got same error. When I check the node status
using CMC, here is the result 


arinto at console.sb7:~$ wget -O - -p 'http://cmc:5012/cmc/allStatus '
--18:36:50--  http://cmc:5012/cmc/allStatus
           => `-'
Resolving cmc... 10.0.0.11
Connecting to cmc|10.0.0.11|:5012... connected. 
HTTP request sent, awaiting response... 200 OK
Length: 477

 0% [
] 0             --.--K/s             <?xml version=' 1.0'?>
        <TESTBED_STATUS>
          <TESTBED_NAME>sb7.orbit-lab.org</TESTBED_NAME>
             <nodeCount>2</nodeCount>
             <activeNodeCount>0</activeNodeCount> 
             <poweredOnNodeCount>0</poweredOnNodeCount>
             <detail>
                    <node name = 'n_1_1' x='1' y='1' state='NODE NOT
AVAILABLE' /> 
                    <node name = 'n_1_2' x='1' y='2' state='NODE NOT
AVAILABLE' />
             </detail>
        </TESTBED_STATUS>
100%[===================================================================
========================================================================
============>] 477           --.--K/s             

18:36:50 (16.28 MB/s) - `-' saved [477/477]


FINISHED --18:36:50--
Downloaded: 477 bytes in 1 files


It states that the nodes is not available. I also tried to power on the
nodes, but it is still the same, the nodes are still not available when
I check the status using allStatus command in CMC 

Thank you, 

Arinto


On 1/4/07, Arinto Murdopo <arinto at gmail.com> wrote:

	I also got this problem just now. 
	
	
	
	On 1/4/07, Sangho Oh < sangho at winlab.rutgers.edu
<mailto:sangho at winlab.rutgers.edu> > wrote:

		Same problem for SB1 and SB5.
		
		
		- Sangho
		
		
		chris at orderonenetworks.com wrote:
		> It is probably power related, but I'm having trouble
doing a node image on 
		> sb2:
		>
		> cmdavies at console.sb2:~$ imageNodes [1,1..2]
baseline.ndz
		> Imaging nodes: [1,1..2] with image baseline.ndz
		> Using config /etc/nodehandler/grid.cfg
		> /etc/nodehandler/grid.cfg:20: warning: Insecure world
writable dir /tmp, 
		> mode 041777
		> Using logfile /etc/nodehandler/nodehandler_log.xml
		>  INFO init: NodeHandler Version 3.6.4-1 (849)
		>  INFO init: Experiment ID: sb2_2007_01_02_22_19_54
		>  INFO Experiment: load system:exp:stdlib 
		>  INFO prop.resetDelay: resetDelay = 180:Fixnum
		>  INFO Experiment: load system:exp:imageNode
		>  INFO prop.nodes: nodes = [[1, 1..2]]:Array
		>  INFO prop.image: image = "baseline.ndz":String 
		> /tmp/eee.247/lib/util/communication.rb:127: warning:
Insecure world
		> writable dir /tmp, mode 041777
		> FATAL run: ServiceException: ServiceException
		>         Node (1,1) Not Registered for Testbed:
'#<CMC::Testbed:0xb7b5ce20>' 
		>  INFO run: Experiment sb2_2007_01_02_22_19_54 finished
after 0:0
		>  done.
		>
		> Thanks,
		> Chris
		>
		>
		>> There was a fairly long power outage earlier today on
campus; everything 
		>> should be back to normal by now.
		>>
		>> Ivan.
		>>
		>> -----Original Message-----
		>> From: owner-orbit-user at winlab.rutgers.edu
<mailto:owner-orbit-user at winlab.rutgers.edu> 
		>> [mailto:owner-orbit-user at winlab.rutgers.edu] On
Behalf Of
		>> chris at orderonenetworks.com
<mailto:chris at orderonenetworks.com> 
		>> Sent: Tuesday, January 02, 2007 1:27 PM
		>> To: orbit-user at winlab.rutgers.edu
		>> Subject: ORBIT-USER: Logging in
		>>
		>> I'm having trouble ssh'ing into orbit-lab. 
		>>
		>> oon2:~ cmdavies$ ssh
cmdavies at console.sb2.orbit-lab.org
		>> ssh: console.sb2.orbit-lab.org : No address
associated with nodename
		>>
		>> ssh'ing to gateway.orbit-lab.org also fails. 
		>>
		>> It may be a problem with my ISP, but I would like to
confirm that the 
		>> lab is up.
		>>
		>> Thanks!
		>> Chris
		>>
		>>
		>>
		>>
		>
		>
		>
		>