ORBIT-USER: imaging of nodes.

[Andrea G. Forte]

Dear all,

I am try to imaging the nodes of the grid using the command:
imageNodes4 [1..20,1..20] baseline.ndz

after issuing this command the imaging starts. Everyday I get warnings 
about different nodes not working, but this is not the issue.
Is it normal that after 45 minutes the imaging is still going on? Also, 
I got the error "FATAL service_call: Exception: ServiceException 
(ServiceException)
ERROR run: ServiceException: ServiceException". Should I ignore it? If 
this is normal, one hour of the two hours that I can reserve each day 
goes away only for imaging, this is really inefficient.

After pressing "Control C" to terminate the imaging, I got the following:
ERROR ExecApp: Application 'commServer' failed (code=2)
ERROR Communicator: ComServer failed: status: 2
FATAL service_call: Exception:  (Interrupt)
/opt/nodehandler-4.1.2/app/nodeHandler.rb:94:in `service_call': 
ServiceException (ServiceException)
        from /opt/nodehandler-4.1.2/lib/handler/cmc.rb:187:in 
`nodeAllOffSoft'
        from /opt/nodehandler-4.1.2/app/nodeHandler.rb:419:in `shutdown'
        from /opt/nodehandler-4.1.2/app/nodeHandler.rb:651

Unfortunately I do not have the exact experiment ID because the console 
froze after interrupting the imaging process. However, it is January 1st 
and I started the experiment at around 4:01 PM.

Your help is very much appreciated as always.

-Andrea