ORBIT-USER: Fail when perform Click-install (Tutorial about Virtual Mobility SS)
Sanjit Krishnan Kaul
sanjitkaul at gmail.com
Thu Feb 22 23:05:54 EST 2007
Don't do click-install mob*.click. Use the actual name of the click file
instead.
_____
From: owner-orbit-user at winlab.rutgers.edu
[mailto:owner-orbit-user at winlab.rutgers.edu] On Behalf Of Arinto Murdopo
Sent: Thursday, February 22, 2007 10:49 PM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Fail when perform Click-install (Tutorial about
Virtual Mobility SS)
Hi Sanjit
I can execute the installation correctly when I do ssh directly to specified
nodes. Here is the example
node1-19:~# modprobe ath_pci
node1-19:~# ifconfig eth0 up
node1-19:~# ifconfig ath0 up
node1-19:~# /bin/sh /root/click-config.sh
node1-19:~# click-install mob*.click
node1-19:~#
However, when I do this via shell script, here is the output, the
click-install command still produce error. Any idea why this error happen?
Or do I need to put delay between
node1-19:~# /bin/sh /root/click-config.sh
and
node1-19:~# click-install mob*.click.
Here is the output error from the shell script (setup.sh)
click-uninstall
modprobe -r ath_pci
ath_pci: Device or resource busy
modprobe_ath_pci
ifconfig eth0 up
ifconfig ath0 up
/bin/sh /root/click-config.sh
click-install mob*.click
insmod: a module named click already exists
click-install: '/sbin/insmod /usr/local/lib/click.o' failed
Here I attach the setup files.
setup.sh is used to setup each node
Setup_Nodes_Script.sh is used to execute setup.sh in specified nodes.
Thank you
Arinto
On 2/23/07, Arinto Murdopo <arinto at gmail.com> wrote:
Thanks, I'll try it!!
arinto
On 2/23/07, Sanjit Krishnan Kaul < sanjitkaul at gmail.com
<mailto:sanjitkaul at gmail.com> > wrote:
I think I know what is going wrong here!
Please open the file CreateMobilitySetup
and replace the line
cp ./database/node?-?.txt ./EthernetAddresses
by
cp ./database/node*-*.txt ./EthernetAddresses
Save the file and re-run CreateMobilitySetup. Upload and install the newly
generated click-script!
_____
From: owner- <mailto:orbit-user at winlab.rutgers.edu>
orbit-user at winlab.rutgers.edu [mailto:owner- orbit-user at winlab.rutgers.edu
<mailto:orbit-user at winlab.rutgers.edu> ] On Behalf Of Arinto Murdopo
Sent: Thursday, February 22, 2007 11:50 AM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Fail when perform Click-install (Tutorial about
Virtual Mobility SS)
Here they are...
Thank you
Arinto
On 2/23/07, Sanjit Krishnan Kaul <sanjitkaul at gmail.com> wrote:
Can you please mail the click script and VM*.txt.
_____
From: owner- <mailto:orbit-user at winlab.rutgers.edu>
orbit-user at winlab.rutgers.edu [mailto:owner- orbit-user at winlab.rutgers.edu
<mailto:orbit-user at winlab.rutgers.edu> ] On Behalf Of Arinto Murdopo
Sent: Thursday, February 22, 2007 11:29 AM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Fail when perform Click-install (Tutorial about
Virtual Mobility SS)
Here is the output of that command
node1-19:~# click-install mob_node_src_generated_Node_1_19.click
mob_node_src_generated_Node_1_19.click:70: While configuring ' FromHost at 39
:: FromHost':
too many arguments; expected 'string, IP address prefix, [keywords]'
mob_node_src_generated_Node_1_19.click:3: While configuring 'ee ::
EtherEncap':
argument 2 takes Ethernet address (source address)
Router could not be initialized!
If the result is like that, I think there is something wrong with the click
configuration file generated by configuration file generator
(CreateMobilitySetup utility). The 2nd line states that the error exists in
line 70 and line 4 states an error also exists in line 3.
I'll try to run that command inside a sandbox. Maybe I generate the file
wrongly.
Thank you for the explanation
Arinto
On 2/23/07, Sanjit Krishnan Kaul <sanjitkaul at gmail.com> wrote:
Just do
Click-install mob_node_src_generated_Node_1_19.click
Instead of click-install *.click
_____
From: owner- <mailto:orbit-user at winlab.rutgers.edu>
orbit-user at winlab.rutgers.edu [mailto:owner- orbit-user at winlab.rutgers.edu
<mailto:orbit-user at winlab.rutgers.edu> ] On Behalf Of Arinto Murdopo
Sent: Thursday, February 22, 2007 10:55 AM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Fail when perform Click-install (Tutorial about
Virtual Mobility SS)
Hi Sanjit
Here is the output of ls -l *.click
node1-19:~# ls -l *.click
-rw-r--r-- 1 root root 2013 Dec 12 2004 ap.click
-rw-r--r-- 1 root root 172 Dec 13 2004 dump2.click
-rw-r--r-- 1 root root 1775 Feb 22 10:43
mob_node_src_generated_Node_1_19.click
Here is the error message
click-install mob*.click
insmod: a module named proclikefs already exists
click-install: '/sbin/insmod /usr/local/lib/proclikefs.o' failed
mob_node_src_generated_Node_1_19.click:70: While configuring ' FromHost at 39
:: FromHost':
too many arguments; expected 'string, IP address prefix, [keywords]'
mob_node_src_generated_Node_1_19.click:3: While configuring 'ee ::
EtherEncap':
argument 2 takes Ethernet address (source address)
Router could not be initialized!
So there are 3 click files. However my installation command is
click-install mob*.click
which only install the generated click files. Besides that I also perfome
click-uninstall to uninstall previous Click kernel module.
Any idea what's happening here? Thank you for your explanation.
Arinto
On 2/22/07, Sanjit Krishnan Kaul <sanjitkaul at gmail.com> wrote:
I meant on the node. Just want to make sure that you don't have more than a
click script in your current directory when you run the click-install
command.
_____
From: owner- <mailto:orbit-user at winlab.rutgers.edu>
orbit-user at winlab.rutgers.edu [mailto:owner- orbit-user at winlab.rutgers.edu
<mailto:orbit-user at winlab.rutgers.edu> ] On Behalf Of Arinto Murdopo
Sent: Thursday, February 22, 2007 1:07 AM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Fail when perform Click-install (Tutorial about
Virtual Mobility SS)
Hi Sanjit
Do you mean in the nodes or in the console? I run it in the node.
However, since my slot is over, I cannot take the output of that command.
Actually I just send the generated Click configuration file to specific
nodes using
scp EthernetAddresses/mob_node_src_generated_Node_12_9.click setup.sh
root at node12-9:~
The EthernetAddresses/mob_node_src_generated_Node_12_9.click itself is
generated from CreateMobilitySetup utility.
thank you
arinto
On 2/22/07, Sanjit Krishnan Kaul <sanjitkaul at gmail.com> wrote:
Please send the output of
$ ls *.click
where you are running the commands from.
_____
From: owner- <mailto:orbit-user at winlab.rutgers.edu>
orbit-user at winlab.rutgers.edu [mailto:owner- orbit-user at winlab.rutgers.edu
<mailto:orbit-user at winlab.rutgers.edu> ] On Behalf Of Arinto Murdopo
Sent: Wednesday, February 21, 2007 10:32 AM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Fail when perform Click-install (Tutorial about
Virtual Mobility SS)
And here what I got when I tried to install in Virtual Grid
-----------------SETUP NODE 18-1------------------
click-uninstall
modprobe -r ath_pci
modprobe_ath_pci
Warning: loading /lib/modules/2.4.26/net/ath_hal.o will taint the kernel:
non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted
modules
Module ath_hal loaded, with warnings
Module ath_pci loaded, with warnings
ifconfig eth0 up
ifconfig ath0 up
/bin/sh /root/click-config.sh
click-install mob*.click
insmod: a module named proclikefs already exists
click-install: '/sbin/insmod /usr/local/lib/proclikefs.o' failed
mob_server_src_generated_VM2.click:40: unknown element class 'ee_VM2_ALLVM'
mob_server_src_generated_VM2.click:37: 'whichVM_cl :: Classifier' has no
output 1
mob_server_src_generated_VM2.click:40: ' Strip at 11 :: Strip' input 0 unused
mob_server_src_generated_VM2.click:37: 'whichVM_cl :: Classifier' output 0
unused
Router could not be initialized!
Any idea what happen with the router? Thank you for your explanations, I'm
not familiar with Click and I think by asking through mailing list is the
fastest way to accelerate my learning curve.. Thank you all :D
arinto
On 2/21/07, Arinto Murdopo <arinto at gmail.com> wrote:
Dear All
I receive errors when I tried to install the Click-configuration file in
tutorial about Virtual Mobility Spatial Switching T_T
Here is the output.
click-install mob*.click
insmod: a module named proclikefs already exists
click-install: '/sbin/insmod /usr/local/lib/proclikefs.o' failed
Last time I managed to install this correctly. Is that because I'm using my
own customized image? I'm using my own customized image tmp/node-
1-1-2007-02-15-11-49-27.ndz
which is click-2.4.26-20051204.ndz with additional iperf (the intergrated
iperf doesn't work, so I install new iperf and save the node)
Thank you
Arinto
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://orbit-lab.org/pipermail/orbit-user/attachments/20070222/32593fd2/attachment.htm
More information about the orbit-user
mailing list