ORBIT-USER: Warning message when installing Click on specific node

[Sachin]

It is the same file. I have fixed the missing link

On 2/13/07, Arinto Murdopo <arinto at gmail.com> wrote:
> Thank you, by the way, where is the xml file for this documentation: (taken
> from:
> http://www.orbit-lab.org/wiki/Documentation/OtherApps/IPerf)
>
>
>
> 1.2   Create the application definition XML file
>
> The application definition file for Iperf is defined to capture the outputs
> that the program reports. This file is later used to auto-generate OML
> library and headers for this application. The following application
> definition file has been written for Iperf (using a subset of command line
> inputs)
>
> [wiki:Documentation/OtherApps/Iperf/IperfAppDefXML Iperf
> Application Definition Schema]  //there is no link to the file in the
> documentation
>
>
> Verify that the XML file is syntactically correct by correct by checking if
> it opens correctly in an XML enabled browser (IE or Mozilla)
> Does that file reside in
> /root/iperf/etc/orbit_winlab_iperf.xml ?
>
> Thank you
>
> Arinto
>
> On 2/14/07, Kishore Ramachandran <kishore at winlab.rutgers.edu> wrote:
> > Hi Arinto:
> >
> > You can use ANY traffic generator (iperf, nuttcp, netperf, OTG, D-ITG,
> etc) on the VMs - use one of the VMs as the client and the other as the
> server. The documentation only consists of click script installation because
> everything else is not part of this emulation system. As I said earlier, you
> can start with shell scripts and writing to text files to begin with. You
> can use OML and other features once you get the basic results.
> >
> > After you run the CreateMobilitySetup script and say that your VMs are
> node1-2 and node1-4 (if IP addr: 192.168.1.4 ), you can run a shell script
> with the following contents:
> >
> > ssh root at node1-2 "/sbin/nuttcp -u -S >> /root/server.log"
> > ssh root at node1-4 "nuttcp -u -i1 -T60 192.168.1.4 >> /root/client.log"
> >
> > This should give you two files which you can post process later. Note that
> you will have to install nuttcp or your preferred traffic generator on the
> image (if it is not already there).
> >
> > regards,
> > Kishore
> >
> >
> >
> > On 2/13/07, Arinto Murdopo < arinto at gmail.com> wrote:
> > > It's work!! Thank you
> > >
> > > However, I'm still confusing how to generate traffic and conduct the
> mobility experiment since the documentation only state that the installation
> of the click script marks the beginning of experiment on each node and
> doesn't specify the detail of the experiment itself.
> > >
> > > How to conduct the mobility experiment? VM1.txt only contains the time
> and position of the mobile node. I don't see any script that uses VM1.txt
> except for CreateMobilitySetup.
> > >
> > > Could you give some script example in measurement collection using this
> Click spatial switching code?
> > >
> > > thank you
> > >
> > > arinto
> > >
> > >
> > >
> > >
> > >
> > > On 2/13/07, Sanjit Krishnan Kaul < sanjitkaul at gmail.com> wrote:
> > > >
> > > >
> > > >
> > > >
> > > > Bring up the eth0 interface before you install the click script.
> > > >
> > > >
> > > >
> > > > $ifconfig eth0 up
> > > >
> > > >
> > > >
> > > > Don't worry about the "taint the kernel warning".
> > > >
> > > >
> > > >
> > > > ________________________________
>
> > > >
> > > > From: owner-orbit-user at winlab.rutgers.edu
> [mailto:owner-orbit-user at winlab.rutgers.edu] On Behalf Of
> Arinto Murdopo
> > > > Sent: Tuesday, February 13, 2007 3:10 AM
> > > > To: orbit-user at winlab.rutgers.edu
> > > > Subject: ORBIT-USER: Warning message when installing Click on specific
> node
> > > >
> > > >
> > > >
> > > >
> > > > Dear All,
> > > >
> > > > I received some warning when I try to install Click framework by
> following this instructions . Actually when I did last instructions:
> > > >
> > > > ssh root at nodex-y click-install mob*.click
> > > >
> > > > Here is the complete output of the expereiment
> > > >
> > > > mob_node_src_generated_Node_4_1.click:9: While
> configuring ' ToDevice at 7 :: ToDevice':
> > > > warning:   device 'eth0' is down
> > > > mob_node_src_generated_Node_4_1.click:24: While
> configuring ' FromDevice at 13 :: FromDevice':
> > > > warning:   device 'eth0' is down
> > > > mob_node_src_generated_Node_4_1.click:22: While
> initializing ' ToHost at 12 :: ToHost':
> > > > warning:   device 'eth0' is down
> > > > Warning: loading /lib/modules/2.4.26/net/ath_hal.o
> will taint the kernel: non-GPL license - Proprietary
> > > >   See http://www.tux.org/lkml/#export-tainted for
> information about tainted modules
> > > > Module ath_hal loaded, with warnings
> > > > Module ath_pci loaded, with warnings
> > > >
> > > > Any explanation about this warnings?
> > > >
> > > > Regards,
> > > >
> > > > Arinto
> > >
> > >
> >
> >
>
>