ORBIT-USER: Imaging never complete in the grid

[Ivan Seskar]

The problem was with one of the switches covering two rows (or is it
columns?) of the grid and that was fixed this afternoon; the rest of the
grid was fine throughout the outage.

Ivan.

PS: Since grid is fully booked we can't test it properly so please
report if you see any problems.

-----Original Message-----
From: owner-orbit-user at winlab.rutgers.edu
[mailto:owner-orbit-user at winlab.rutgers.edu] On Behalf Of
drastogi at eden.rutgers.edu
Sent: Saturday, February 10, 2007 1:12 PM
To: orbit-user at winlab.rutgers.edu
Subject: Re: ORBIT-USER: Imaging never complete in the grid

I too am unable to image nodes. Some nodes simply do not turn on when
imaging and for some nodes I get the following message:

 WARN -:topo:image: Ignoring missing node '20 at 15'

Please someone look into this.
Devashish.


> Dear all,
>
> I try to image several nodes in the maingrid using spatial switching 
> images (from http://www.orbit-lab.org/wiki/HowTo/virtualMobilitySS)
>
> However the imaging process never complete. The imaging process stucks

> in this line :
>
>  INFO exp: Progress(6/6): 0/83/100 min(n_4_5)/avg/max (140.255849)
>
> here is the command that I use for imaging in main grid:
>
> imageNodes [3,6],[5,6],[4,1],[4,3],[4,5],[4,7] 
> click-2.4.26-20051204.ndz
>
>
> Regards,
>
> arinto
>