ORBIT-USER: Problem with the 'OML'ized Iperf

[Ramya Krishnamoorthy]

Hi Haris

You are right. The script originally just had a 10 second pause which
probably wasn't enough. Changing it to 30 seconds made it work.
Thank you very much for your sugggestion!

Thanks
Ramya

> one thing that comes to my mind is that these scripts usually have 30
> seconds pause before an application starts in order to allow the cards
> to associate
>
> during the experiment run this is reported on the console as a line
> containing the MAC address of the AP, if it's a bunch of zeros, the
> nodes didn't associate and this results in the tables being empty
> while everything else looks fine
>
> On 4/9/07, Ramya Krishnamoorthy <rk274 at cornell.edu> wrote:
>> Hi
>>
>> I imaged sb5 with the baseline.ndz image which contains the OMLized
>> iperf
>> and ran the experiment script given in the documentation
>> http://www.orbit-lab.org/wiki/Documentation/OtherApps/Iperf/ExperimentScript
>> .
>> When I check the database, I see two tables receiver_iperfr_receiverport
>> and
>> sender_iperfs_senderport but they are empty.
>> The experiment ran successfully without errors. The experiment log file
>> is
>> attached.
>> What could be wrong here?
>>
>> Thanks
>> Ramya
>>
>>
>