ORBIT-USER: booting the grid

[Sachin Ganu]

Is this with imageNodes or imageNodes4?



On 10/30/06, Vanessa Frias-martinez <vf2001 at cs.columbia.edu> wrote:
>
> sure,
>
> INFO run: Experiment grid_2006_10_30_10_27_33 finished after 106:34
>
> vanessa
>
>
> On Mon, 30 Oct 2006, Sachin Ganu wrote:
>
> > Vanessa,
> > Could you please specify the experiment ID?
> >
> >
> >
> > On 10/30/06, Vanessa Frias-martinez <vf2001 at cs.columbia.edu> wrote:
> > >
> > > Hi!
> > >
> > > I'm trying to load an image on the 2..4,2..4 grid nodes.
> > > But apparently it gets stuck...it's been here for 10 minutes:
> > >
> > >  INFO exp: Progress(9/9): 0/66/100 min(n_3_2)/avg/max (96.548348)
> > >  INFO exp: Progress(9/9): 0/66/100 min(n_3_2)/avg/max (96.548348)
> > >  INFO exp: Progress(9/9): 0/66/100 min(n_3_2)/avg/max (96.548348)
> > >  INFO exp: Progress(9/9): 0/66/100 min(n_3_2)/avg/max (96.548348)
> > >  INFO exp: Progress(9/9): 0/66/100 min(n_3_2)/avg/max (96.548348)
> > >
> > > Could anybody look into this problem?
> > >
> > > Thanks so much!
> > >
> > > vanessa
> > >
> > >
> > > On Mon, 30 Oct 2006, Vanessa Frias-martinez wrote:
> > >
> > > > Ok, thanks!
> > > >
> > > > vanessa
> > > >
> > > > On Mon, 30 Oct 2006, Sachin Ganu wrote:
> > > >
> > > > > That node has Intel cards. For all other nodes with Intel cards, take a look at
> > > > > http://www.orbit-lab.org/wiki/IntelNodes
> > > > >
> > > > > Since you are manually configuring interfaces, you need to do the following
> > > > > 1) modprobe ipw2200
> > > > > 2) ifconfig eth2 up
> > > > >
> > > > > If you are using the Ruby script, nodehandler automatically takes care of this
> > > > >
> > > > > If your experiment requires Atheros cards, I recommend using other nodes
> > > > >
> > > > > On 10/30/06, Vanessa Frias-martinez <vf2001 at cs.columbia.edu> wrote:
> > > > > >
> > > > > > Hi!
> > > > > >
> > > > > > I get this error when trying to configure ath0 at node1-1 in the grid:
> > > > > >
> > > > > > node1-1:~# ifconfig ath0 192.168.1.1 up
> > > > > > SIOCSIFADDR: No such device
> > > > > > ath0: ERROR while getting interface flags: No such device
> > > > > > ath0: ERROR while getting interface flags: No such device
> > > > > > node1-1:~#
> > > > > >
> > > > > > any idea?
> > > > > >
> > > > > > thanks!
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>